What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
Weld tester
Post Reply
pigpen60
  • Posts:
  • Joined:
    Sat Oct 18, 2014 7:00 pm
  • Location:
    foley missouri

Anyone build a weld tester? Would just be for personal use.
Top
User avatar

Sorry, not sure what you're asking for, can you explain further?
Richard
Website
Top
Simclardy
  • Posts:
  • Joined:
    Mon Jul 24, 2017 9:41 pm
  • Location:
    Cape cod mass

I put my oscilloscope on my welders. Outside of that, you are the "tester".


Sent from my SM-G930V using Tapatalk
Top
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

Lots of motor rebuild shops can load test a welder.
I have more questions than answers

Josh
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

You guys are being silly now. You know very well the OP means weld not welder testing.

He probably means some kind of combined mechanical and sonic tester like this:
Weld tester.png
Weld tester.png (51.37 KiB) Viewed 2650 times
You hit the weld and if it doesn't fall off it passes the mechanical test. At the same time if it sends out a clear note, it passes the sonic test. If the sound is dull that means there are inclusions and you have to grind it out.
Flat out like a lizard drinkin'
Top
BillE.Dee
  • Posts:
  • Joined:
    Mon Nov 27, 2017 8:53 pm
  • Location:
    Pennsylvania (Northeast corner)

.......... :shock: ............
Top
Simclardy
  • Posts:
  • Joined:
    Mon Jul 24, 2017 9:41 pm
  • Location:
    Cape cod mass

Coldman wrote:You guys are being silly now. You know very well the OP means weld not welder testing.

He probably means some kind of combined mechanical and sonic tester like this:
Weld tester.png
You hit the weld and if it doesn't fall off it passes the mechanical test. At the same time if it sends out a clear note, it passes the sonic test. If the sound is dull that means there are inclusions and you have to grind it out.
U probably right.

Where can i buy one! Does it work on other things? Like my car?


Sent from my SM-G930V using Tapatalk
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

It was developed and available, l believe, in California where other methods of inspection are known to be carcenogenic.
Be aware that ever since Nick Fury put his eye out weld testing on the flying carrier, it's mandatory you wear non carcenogenic safety glasses.
Flat out like a lizard drinkin'
Top
BillE.Dee
  • Posts:
  • Joined:
    Mon Nov 27, 2017 8:53 pm
  • Location:
    Pennsylvania (Northeast corner)

and,,,,,they're off,,,,said the monkey as he backed into a rotating fan.

I think I just whipped carcinogenic ideology from california.
Top
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

Here's some info from AWS D1.1 and a simplistic example of one.
guided bend test jig1.JPG
guided bend test jig1.JPG (65.19 KiB) Viewed 2563 times
guided bend test jig2.JPG
guided bend test jig2.JPG (33.3 KiB) Viewed 2563 times
guided bend test jig3.JPG
guided bend test jig3.JPG (34.99 KiB) Viewed 2563 times
Coupon bender guided bend test.jpg
Coupon bender guided bend test.jpg (38.73 KiB) Viewed 2563 times
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Top
Post Reply

Return to “Welding Projects - Welding project Ideas - Welding project plans”