[Olecoot]

I made this last summer after I bought my Miller and plasma cutter. Works great for my needs. Holds two bottles, one Argon, one Mig 75\25. I want to add a drawer for consumables at some point.

20200718_102723.jpg (75.27 KiB) Viewed 1817 times

20200718_113256.jpg (64.92 KiB) Viewed 1817 times

20200724_091951.jpg (73.56 KiB) Viewed 1817 times

20200724_095203.jpg (75.93 KiB) Viewed 1817 times

20200801_102351.jpg (200.57 KiB) Viewed 1817 times

20200801_102351.jpg (200.57 KiB) Viewed 1817 times

20200801_120230.jpg (77.21 KiB) Viewed 1817 times

20200802_085616.jpg (219.02 KiB) Viewed 1817 times

[BugHunter]

Pretty cool. I like the expanded metal idea.

[BillE.Dee]

I like the expanded metal idea too. I tried that when I fixed a water bucket ... once.

[JayWal]

Expanded metal looks good, but man I hate working with the stuff. Always sharp edges, a pain to weld, rattles, a bugger to paint since you're painting more air than metal, but in the end usually turns out nice.

Sent from my SM-G930W8 using Tapatalk

[BugHunter]

Expanded metal looks good, but man I hate working with the stuff. Always sharp edges, a pain to weld, rattles, a bugger to paint since you're painting more air than metal, but in the end usually turns out nice.

Sent from my SM-G930W8 using Tapatalk

I've deburred the shear-cut stuff before using the tig welder. Turn the amps up, light an arc across all the sharp edges and viola, they're rounded over!

Does work...