long post -- cliff notes -- bought jeep in box, welding it up.
I've always had a thing for jeeps and taking the path less traveled. Had my 1st jeep in '84, The more I got into 4x4's the more I would make a few mods to them .
my 81 CJ7
then I had a TJ, then a YJ and then another CJ.
the last CJ7
Stopped wheeling for a while three years ago for health reasons, then I got the bug again.. always liked the Goatbuilt Chassis kits and almost bought the Ibex one a while back, then he came out the with Jeep LJ kit and I was hooked. May last year I ordered one. I already had the subframe assembly so that saved me a dollar.
jeep in a box
spent some time gathering up some parts and a new welder, helmet(s) and other shop stuff \ tools I needed before I got started.
I assembled the subframe assembly first .
Once I had the subframe assembly put together, I began working on the chassis jig and getting it laid out properly. My Son came for a visit and helped with that part. this is the same kid in the first pic, only taller lol
once the jig was set, I began adding the pieces. Important note here, Each piece of the chassis is numbered and marked, notched and or bent. Which is a huge help.
stopped a bit and joined this site and got a huge amount of help with my welding, for which I am forever thankful. Free beer and brisket for all... one day. Its been slow but I've been trying to do a little every day. Wife, Work, Chores etc keep me busy, something about too many irons in the fire.
Which brings us up to the current pics.
started fish plating this past weekend.
and that's where I'm at as of this writing. I have everything on hand needed to make it a roller. just some more assembly needed.
What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
How about posting some pics so other welders can get some ideas?
Jeep in a box! I never knew there was such a thing, that's a very cool and ambitious project.
Please keep the post updated as the project progresses. It's really great to follow along.
Thanks for posting!
Please keep the post updated as the project progresses. It's really great to follow along.
Thanks for posting!
yes it is. there are 5 shows chronicling the build. I reference those from time to time. Josh @ Goatbuilt has been a huge help as well.Onelick wrote:Is this the same kit that Ian Johnson made on Fourwheeler on MotortrendTV? He did a 3 part series on the build of a kit jeep like that. It also might be on his youtube channel "Big Tire Garage".
Onelick
Fame is vapor, popularity an accident, riches take wings. Only one thing endures and that is Character.
I got a bit more done since our last visit.
- My Buddy came over to lend a hand getting the subframe positioned correctly.
- 20210123_103814.jpg (85.98 KiB) Viewed 3832 times
- Subframe is set in place and tacked.. measure measure measure then measure again. :)
- 20210123_131705.jpg (79.23 KiB) Viewed 3832 times
- just burning more wire.
- 20210123_173452.jpg (49.52 KiB) Viewed 3832 times
Fame is vapor, popularity an accident, riches take wings. Only one thing endures and that is Character.
WTXOffroader
- WTXOffroader
-
New Member
-
Posts:
-
Joined:Thu Feb 06, 2020 7:04 pm
I've gotta get my junk running so I can come wheel with you atleast once before you sell it. Lol
Sent from my SM-G975U using Tapatalk
Sent from my SM-G975U using Tapatalk
Haha! You have a cpl months yet....Good to see you on hereWTXOffroader wrote:I've gotta get my junk running so I can come wheel with you atleast once before you sell it. Lol
Sent from my SM-G975U using Tapatalk
Fame is vapor, popularity an accident, riches take wings. Only one thing endures and that is Character.
Return to “Welding Projects - Welding project Ideas - Welding project plans”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities