What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
Tig cart for my Invertig 221 and watercooler
Post Reply
Weldor
  • Posts:
  • Joined:
    Thu Feb 14, 2013 10:22 am

I have had a syncrowave 200 for many years and strpped up to an inverter.... First thing is to get it off the bench! This is stuff i had laying around the yard and shop.
Attachments
image.jpg
image.jpg (17.85 KiB) Viewed 2444 times
image.jpg
image.jpg (17.47 KiB) Viewed 2444 times
image.jpg
image.jpg (29.99 KiB) Viewed 2444 times
Top
Weldor
  • Posts:
  • Joined:
    Thu Feb 14, 2013 10:22 am

And more....
Attachments
image.jpg
image.jpg (36.77 KiB) Viewed 2443 times
image.jpg
image.jpg (27.38 KiB) Viewed 2443 times
image.jpg
image.jpg (23.04 KiB) Viewed 2443 times
Top
Weldor
  • Posts:
  • Joined:
    Thu Feb 14, 2013 10:22 am

And finished
Attachments
image.jpg
image.jpg (25.36 KiB) Viewed 2442 times
image.jpg
image.jpg (28.95 KiB) Viewed 2442 times
image.jpg
image.jpg (38.96 KiB) Viewed 2442 times
Top
User avatar
  • Posts:
  • Joined:
    Sun Feb 17, 2013 1:30 pm
  • Location:
    Colorado

Nice project you have going there Weldor. Hope you have a cherry picker to pull that beast off the bench. At ~240 pounds I can see why you want it off the bench! :o
Go break something, then you can weld it back the right way.

Image
Top
User avatar
  • Posts:
  • Joined:
    Sun Feb 17, 2013 1:30 pm
  • Location:
    Colorado

Guess I didn't wait long enough. You were posting and I was still typing...

Nicely done cart Weldor!
Go break something, then you can weld it back the right way.

Image
Top
Alexa
  • Posts:
  • Joined:
    Mon Dec 31, 2012 10:07 am

Weldor.

You might want to control the ventilation, if necessary, a slight modification in the area(s) of the venting slits.

Alexa
Top
Weldor
  • Posts:
  • Joined:
    Thu Feb 14, 2013 10:22 am

Yea i was thinking of that... We'll see how it works out ducting it shouldn't be needed... But if it is, well, i am a jm sheet metal guy shouldn't be too hard
Top
delraydella
  • Posts:
  • Joined:
    Mon Apr 25, 2011 7:35 pm
  • Location:
    Detroit, MI

Very nice! Diamond plate makes everything look better.
Welding☞Syncrowave 250,Millermatic 252,30a Spoolgun Cutting☞12" Hi-speed Cutoff Saw, 9x 12 Horizontal Bandsaw Milling☞Gorton 8d Vertical Mill Turning☞Monarch EE Precision Lathe Grinding ☞Brown & Sharpe #5 Surface Grinder
Top
Weldor
  • Posts:
  • Joined:
    Thu Feb 14, 2013 10:22 am

Lotsa room for air flow!
Attachments
image.jpg
image.jpg (47.89 KiB) Viewed 2427 times
Top
TamJeff
  • Posts:
  • Joined:
    Tue Dec 04, 2012 4:46 am

Nice work.
Miller ABP 330, Syncrowave 250, Dynasty 300 DX.
Honorary member of the Fraternity of Faded Tee Shirts.
Top
Alexa
  • Posts:
  • Joined:
    Mon Dec 31, 2012 10:07 am

Weldor.

You using the floor and/or the hand control for the amps?
If hand, which model did you buy?

Alexa
Top
Weldor
  • Posts:
  • Joined:
    Thu Feb 14, 2013 10:22 am

I am using the foot pedal... The one that comes with the HTP is similar if not a rebadged SSC Controls pedal. I used the SSC pedal on my syncrowave but sold it with the machine. Really good quality pedal. Not using a hand control at all.
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Alexa,

I use a thumb-control on a synchrowave at work when the foot pedal is impractical. Mine is from Profax, an MFTC-14, for the 14-pin connector on the machine. I think the Profax part # is PX129-341.

It's quite reliable, but has a long travel like a volume-knob on a radio, so I tend to set my max Amps far higher than I need, so my intended range is within the first 1/3 of the dial.

CK Industries make one that has a "slide" action that I haven't tried, but I believe the slide action will feel more natural than working a small dial with your thumb.

Steve S
Top
Post Reply

Return to “Welding Projects - Welding project Ideas - Welding project plans”