What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
gru a portale fatta in casa consigli
Post Reply
desessentes
  • Posts:
  • Joined:
    Tue Feb 11, 2014 10:31 am
  • Location:
    brescia italia lombardia

Buonasera signori utenti del forum mi presento: sono DES ESSEINTES faccio il metalmeccanico per la mia piccola e modesta officina devo realizzare una piccola e robusta gru a cavaletto o portale in acciaio con ruote, le misure sono: altezza sotto gancio: H =3 metri , larghezza fra i pilastri montanti L= 3 metri, larghezza traversa base almeno 1,50m per evitare ribaltamento, io molto modestamente consultando le tabelle credo che per la traversa dovrei usare una trave in acciaio IPE 160/ o 180mm per i montanti una HEA 120 mm o dello scatolato 100x100x 4mm per fazzoletti irrigidimento una UPE da 100mm cosa ne pensate Voi in base alla Vostra esperienza vi prego di inviarmi foto opinioni consigli testimonianze o progetti grazie per il tempo e la pazienza saluti DES ESSEINTES

inglese:Good evening gentlemen users of the forum let me introduce myself: I am des Esseintes do the engineering for my modest little workshop I have to make a small and sturdy tripod or portal crane with steel wheels, the measurements are: height under hook: H = 3 meters, width between the pillars pillars L = 3 m, width 1.50 m crossbar based at least in order to avoid overturning, I very modestly by consulting the tables I think the bar should I use for a steel beam IPE 160 / 180mm or uprights for a HEA 120 mm or of the box 100x100x 4mm to 100mm handkerchiefs stiffening a UPE what do you think based on your experience, please send me pictures opinions or recommendations testimonies projects thanks for your time and patience Regards Des Esseintes
3m=300cm,; 1,50m= 150cm:
150cm = 591⁄16in
300cm = 1187⁄64in

https://encrypted-tbn0.gstatic.com/imag ... tM7wRiEbow
Nota: I risultati frazionari sono arrotondati al più vicino 1/64. Per una ris

http://i45.photobucket.com/albums/f83/d ... rqJOemjIRU

https://encrypted-tbn3.gstatic.com/imag ... IYEytHPizD
:?:
bisogna ch'io mi vendichi, perché ho sofferto per quattordici anni: per quattordici anni ho pianto, ho maledetto.
Top
Mike
  • Posts:
  • Joined:
    Mon Dec 06, 2010 1:09 pm
  • Location:
    Andover, Ohio

Welcome to the forum desessentes.
M J Mauer Andover, Ohio

Linoln A/C 225
Everlast PA 200
Top
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

The local company in my area sell portable aluminum gantry lifts.
https://www.youtube.com/watch?v=DzcJiBqNFQw
http://www.easilymovedequipment.com/index.php
Top
Post Reply

Return to “Welding Projects - Welding project Ideas - Welding project plans”