What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
Log banister brackets
Post Reply
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

I DID NOT WELD AN INCH ON THESE THINGS!!! I recently had a large project for someone who is working on finishing their log house and building a new barn. I had to make a few gates and these brackets. I cut all of these by hand. The brackets had to be 5"x6" and the design couldn't be over 5". I cut 2 of each design and 10 blank 5"x6" brackets. The person I made it for welded the pipe to them, sand blasted them, and painted them. I just had to cut the brackets. Fun easy project, unfortunately I miscalculated how many he wanted made and under priced it horribly, but made up for it elsewhere ;)
Attachments
1560477_10202443830917453_4800264361783134523_n.jpg
1560477_10202443830917453_4800264361783134523_n.jpg (59.39 KiB) Viewed 961 times
10359550_10202443829877427_541637268734692941_n.jpg
10359550_10202443829877427_541637268734692941_n.jpg (74.99 KiB) Viewed 961 times
10481149_10202443829317413_1368382097751248628_n.jpg
10481149_10202443829317413_1368382097751248628_n.jpg (48.13 KiB) Viewed 961 times
10500267_10202443828957404_3327431908596330114_n.jpg
10500267_10202443828957404_3327431908596330114_n.jpg (50.11 KiB) Viewed 961 times
10501599_10202443828757399_9116905669128784003_n.jpg
10501599_10202443828757399_9116905669128784003_n.jpg (56.13 KiB) Viewed 961 times
10568878_10202443828437391_3945785730945263477_n.jpg
10568878_10202443828437391_3945785730945263477_n.jpg (65.37 KiB) Viewed 961 times
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

By the way, all of those were hand cut. Yes even the square parts on the bottom were free hand cut. :D
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Sweet!!! 8-)
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

Thanks, it was fun cutting them that small. We made all of those designs larger before but not that small before. :)
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

Wow, that is very nice. I don't think I could do those free hand, at least not without some practice runs first.
-Jonathan
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

Thanks guys. I was so upset when I saw the welds the guy did. I would have tigged it and made it look good but he ended up mig welding them and went too fast from what I could see and stopped a lot and didn't tie in too good. I worked so hard on them things. I had to do 10 of them and 10 blanks. I cheated on the blanks, I hand cut a 4 foot long strip 5" wide and took it to the chop saw and cut it every 6" so I didn't have to hand cut all of them. :D
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
User avatar
  • Posts:
  • Joined:
    Tue Aug 05, 2014 11:49 pm
  • Location:
    MA, USA

Those look great - they really add some character to the railing.
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

All right... I'm going to be accused of being the language police...

Those are balustrade brackets, not banistrade brackets.

A balustrade is level. A banistrade decends a stairway or ramp.

Yeah, I know, I'm separating fly turds from pepper... It's like the difference between muntons and mullions in a divided-light window.

:roll:

Steve S
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

Otto Nobedder wrote:All right... I'm going to be accused of being the language police...

Those are balustrade brackets, not banistrade brackets.

A balustrade is level. A banistrade decends a stairway or ramp.

Yeah, I know, I'm separating fly turds from pepper... It's like the difference between muntons and mullions in a divided-light window.

:roll:

Steve S
Steve I am in West Virginia, ain't nothin' level here :lol:
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
Post Reply

Return to “Welding Projects - Welding project Ideas - Welding project plans”