needed to make 16 6"x6" 14 ga steel corner for table project for my wife.
stopped at several small local fab shops and they were so busy they said 2 to 3 weeks to
cut and bend 90s.
spent an hour or so fabing up 10" metal brake that
only needed to do this one chore.
another hour cutting pieces with sabers and bandsaw.
all bent 80 hours quicker than fab shops.
point here is all the things you can do yourself
if you have some welding ability.
wish i could figure out how to rotate pics.
- Attachments
-
- IMG_1361.JPG (113.45 KiB) Viewed 908 times
-
- IMG_1359.JPG (114.73 KiB) Viewed 908 times
-
- IMG_1358.JPG (114.69 KiB) Viewed 908 times
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Now thats thinking and doing
Everlast 250EX
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)