Did Jody ever post plans for that, here or on the main site? I know it was discussed, but were the actual plans posted anywhere? Or is it just the group of videos?
I was asked privately about this, and don't recall seeing actual plans.
Thanks,
Steve S
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Steve, i saw this welding cart plan on WCWELDING.COM. It may be Jody's because of the mention of aerospace master fabricator. When i was looking for plans several weeks ago i found this site. (I will learn to weld first!) I went back to the site this am and took this from the text on the site:
"The following welding cart plans are simple, new, and are much more than a set of plans. You'll also get step by step directions. It's a 13 page step-by-step guide in all, making it a comprehensive and fun project you will benefit from for many years to come.
These cart plans were professionally designed. The designer is a 15 year master fabricator and engineer who specializes in the aerospace industry."
I think thereis a small fee for downloading the step by step plans, they may not even be Jody's plans but somehow I remember his name being attached during my original plans search.
"The following welding cart plans are simple, new, and are much more than a set of plans. You'll also get step by step directions. It's a 13 page step-by-step guide in all, making it a comprehensive and fun project you will benefit from for many years to come.
These cart plans were professionally designed. The designer is a 15 year master fabricator and engineer who specializes in the aerospace industry."
I think thereis a small fee for downloading the step by step plans, they may not even be Jody's plans but somehow I remember his name being attached during my original plans search.
jdranchman
- jdranchman
-
New Member
-
Posts:
-
Joined:Fri Jun 06, 2014 11:06 am
-
Location:Colorado
Going back over Jody's videos (something I do often) he talks about the cart dimensions and scratches up a drawing. The risers are 38". 10" for the tanks. The center tray is probably down 19" from the top (1" more than half). His back wheels are 10" solid rubber mounted close to center of the tanks. This should give you a good shopping list but I'd still recommend watching the videos again and draw your own plans.
EDIT - this drawing is a screen snapshot out of one of Jody's videos. He mentioned he would have a better pdf of it up on his website someday. Life gets busy. I'm sure he will get to this ASAP. One thing he mentioned in the last video was this cart was very heavy and would be better if he used 1" square tubing. Something he said he might try and do for cart v2.
EDIT - this drawing is a screen snapshot out of one of Jody's videos. He mentioned he would have a better pdf of it up on his website someday. Life gets busy. I'm sure he will get to this ASAP. One thing he mentioned in the last video was this cart was very heavy and would be better if he used 1" square tubing. Something he said he might try and do for cart v2.
- jody's-welding-cart-cut.png (142.87 KiB) Viewed 3043 times
Last edited by jdranchman on Mon Apr 06, 2015 5:01 pm, edited 1 time in total.
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
Anyone who feels the need to call themselves a master fabricator is trying to prove something, and probably is a bit lacking. Jody is at least 35 years into the industry, and never labels himself like that. PS I'm around 15 years in, and I'm not a master of anything.
- Ratsathome
-
New Member
-
Posts:
-
Joined:Thu Feb 26, 2015 5:53 pm
-
Location:Ireland
Jack of all trades, master of none. 
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
I can bait a hook better than anyone else in the world that makes me a 
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
I'm really great at having arguments about addition and subtraction. That makes me a legendary math debater. Sorry Goat Driver.
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Damnit! Stole my thunder!exnailpounder wrote:I can bait a hook better than anyone else in the world that makes me a
My dad always told me, before you fish with lures...
Mike, i don't think, not sure tho, the individual was referring to themselves as a master fabricator, rather the written words were by others. I have a Master License in HVAC, but THAT does not make me a Master. I think of myself as a perpetual student, the education never ends!weldin mike 27 wrote:Anyone who feels the need to call themselves a master fabricator is trying to prove something, and probably is a bit lacking. Jody is at least 35 years into the industry, and never labels himself like that. PS I'm around 15 years in, and I'm not a master of anything.
- Braehill
-
Weldmonger
-
Posts:
-
Joined:Sat Jul 06, 2013 11:16 am
-
Location:Near Pittsburgh,Pennsylvania. Steel Buckle of the Rust Belt
Life has a funny way of educating those who think that they've learned all there is to know and it usually takes awhile to heal. 
I hated school but I've spent my whole life being a student in life's classroom.
Len
I hated school but I've spent my whole life being a student in life's classroom.
Len
Now go melt something.
Instagram @lenny_gforce
Len
Instagram @lenny_gforce
Len
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
It does seem like it was written by a journalist...
- RocketSurgeon
-
Guide
-
Posts:
-
Joined:Wed Mar 11, 2015 9:13 am
-
Location:All around Lake Pontchartrain
I went to WCWELDING.COM and looked at the cart plans. That is NOT Jody's cart. Besides, Jody made no mention of a 3D CAD drawing. "No PhD's here!"
I'm still looking for it...anywhere.
I'm still looking for it...anywhere.
Chris
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
taildragger
- taildragger
-
New Member
-
Posts:
-
Joined:Fri Apr 17, 2015 2:15 am
Here is my version of Jody's cart
The Red ,I like the colour choice.
Red & green, Christmas in April.
Red & green, Christmas in April.
Everlast 250EX
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
My welding and cart project are not up to paint and photos quite yet.
Reading this thread reminds me of a quote from H. G. Wells, something like:
Human history is more and more a race between education and catastrophe.
Now back to grinding splatter and buildup around voids.
Reading this thread reminds me of a quote from H. G. Wells, something like:
Human history is more and more a race between education and catastrophe.
Now back to grinding splatter and buildup around voids.
- TRACKRANGER
-
Weldmonger
-
Posts:
-
Joined:Wed Aug 06, 2014 12:48 am
-
Location:Melbourne, Australia
Taildragger, what a great job, looks ideal.
And welcome to the forum too!
And welcome to the forum too!
EWM Phonenix 355 Pulse MIG set mainly for Aluminum, CIGWeld 300Amp AC/DC TIG, TRANSMIG S3C 300 Amp MIG, etc, etc
