He just had back surgery so he needed a grunt who can weld and works for cheap.....Funny.
![Laughing :lol:](./images/smilies/icon_lol.gif)
Anyway, this is a 8'x12' single 3,500lb axle deck-over trailer.
We're gonna make it a 22' deck, with dual 3,500lb axles.....
We cut the rear off 8" from the end, added 4 10 feet long sticks of 5" channel, and then put the back back on.
Fish plated the 4 joints over the axle with 4"x1/4" flatbar.
3/32" and 1/8" 7018 used, on an everlast 250ex.....
The cross members are 3"x3/16" angle.
That cross brace in between the axles was supposed to be centered at the joint, but oh well....
We moved the jack to the middle too.... Ramp holders as well.
That's about the size of it..... Right after we finished, it got loaded up with a rhino, wheeler, and wagon and went for a 100 mile round trip, on the highway at 55-65mph....
She has brakes on both axles, and with the controller only set on 3, she really can get you slowed down....
Still need to get the marker lights on the 4 corners.
That evolution raptor evo380 is awesome, and I don't know how I ever lived without those 4 strong hand clamps....
Anyway,
Enjoy the pics.
~John.....