[shipj0]

11ft Length, 5ft beam, 5086 bottom, 5052 sides. Powered by inboard motor and jet from personal water craft. Target: 150HP.

IMG_4023.JPG (36.85 KiB) Viewed 1467 times

IMG_4018.JPG (32.41 KiB) Viewed 1465 times

IMG_4021.JPG (30.29 KiB) Viewed 1465 times

IMG_3976.JPG (24.2 KiB) Viewed 1465 times

IMG_0166.JPG (27.18 KiB) Viewed 1465 times

IMG_0164.JPG (26.4 KiB) Viewed 1465 times

[LtBadd]

11ft Length, 5ft beam, 5086 bottom, 5052 sides. Powered by inboard motor and jet from personal water craft. Target: 150HP.

Don't know much about boats, but that looks great, keep us updated.

[Otto Nobedder]

Excellent! Nice form, fit, and welding. Should be a blast to pilot.

I'll bet you'll have slightly more than $1/HP in that project...

Steve S

[shipj0]

Outside the weather's frightful but inside welding up a boat is so delightful, let it snow, let it snow, let it snow. -60 with wind chill at Prudhoe Bay AK. Burr, will be cold for Santa getting out of the North Pole this year.

Steve. BOAT = Bust Out Another Thousand. Guess I could put the 300hp in and that would make the $/hp ration better but the fuel cost would eat up the savings pretty quick. Would be mad fun though in the shallow rivers.

Will post more photos as I get further along.

[ldbtx]

When I had an old wood forty-footer years ago, we called it "a hole in the water surrounded by wood, into which you pour money".

[GoRilla]

Very nice build !