I was tired of storing my woodworking miter saw on a moving dolly and now really making it convenient to use. As I've said before, my garage is packed full of tools and if it's too big to fit on a shelf easily, it needs to be on wheels.
I know there are lots of off-the-shelf saw stands out there, but good luck finding one that fits under my tablesaw and is easily mobile. Here's what I came up with for a lot less than what DeWalt or Bosch charges. Nothing fancy but I'm pleased with it.
steve
- Attachments
-
- IMG_4028.JPG (124.87 KiB) Viewed 869 times
-
- IMG_4029.JPG (133.4 KiB) Viewed 869 times
-
- IMG_4030.JPG (136.5 KiB) Viewed 869 times
-
- stowed away under the table saw
- IMG_4031.JPG (117.66 KiB) Viewed 869 times
Figuring out what I want to be when I grow up.
Better to be a "Learn it all" than a "Know it all"
Better to be a "Learn it all" than a "Know it all"
- ldbtx
-
Heavy Hitter
-
Posts:
-
Joined:Thu Jun 13, 2013 12:54 am
-
Location:North Central Texas
-
Contact:
Nicely done.
Miller Bobcat 225
Tweco Fabricator 211i
AHP AlphaTIG 200x
Lincoln SP-135+
Hypertherm Powermax 30 Air
ProStar O/A torch
Tweco Fabricator 211i
AHP AlphaTIG 200x
Lincoln SP-135+
Hypertherm Powermax 30 Air
ProStar O/A torch
Thanks!
I used 1.5" and 1.25" square tubing. 14 gauge I believe. The fit is a little sloppy but it's good enough for my purposes.
steve
I used 1.5" and 1.25" square tubing. 14 gauge I believe. The fit is a little sloppy but it's good enough for my purposes.
steve
Figuring out what I want to be when I grow up.
Better to be a "Learn it all" than a "Know it all"
Better to be a "Learn it all" than a "Know it all"