error_outline JavaScript Disabled
What welding projects are you working on? Are you proud of something you built?
Posts:
Joined:
Sat Mar 08, 2014 9:00 pm
Location:
Canada
Tue Jan 26, 2016 12:07 am
[
Attachments
20160110_144001.jpg (85.58 KiB) Viewed 12363 times
Posts:
Joined:
Sat Mar 08, 2014 9:00 pm
Location:
Canada
Tue Jan 26, 2016 12:09 am
Some more to follow
Attachments
20160110_193317.jpg (82.61 KiB) Viewed 12357 times
Posts:
Joined:
Sat Mar 08, 2014 9:00 pm
Location:
Canada
Tue Jan 26, 2016 12:11 am
and one more
Attachments
20160123_181821.jpg (82.7 KiB) Viewed 12356 times
Posts:
Joined:
Wed Oct 23, 2013 3:30 pm
Location:
Palmer AK
Tue Jan 26, 2016 3:52 am
Outstanding!!!!!
Just a couple welders and a couple of big hammers and torches.
Posts:
Joined:
Sat Mar 08, 2014 9:00 pm
Location:
Canada
Tue Jan 26, 2016 7:39 am
Because space is a issue I made the fab table do the slide thing.
Attachments
20151219_205359.jpg (33.34 KiB) Viewed 12329 times
Tue Jan 26, 2016 1:52 pm
how did you bend that square tubing?
htp invertig 221
Posts:
Joined:
Sun Apr 12, 2015 4:00 pm
Location:
Clearwater FL
Contact:
Tue Jan 26, 2016 7:27 pm
Like it!
Posts:
Joined:
Sat Mar 08, 2014 9:00 pm
Location:
Canada
Tue Jan 26, 2016 11:22 pm
I have 4" of slope in my shop. I am still working out the kinks on the screw jack but they seem to be working.
Attachments
20160110_170705.jpg (69.17 KiB) Viewed 12247 times
Posts:
Joined:
Sat Mar 08, 2014 9:00 pm
Location:
Canada
Tue Jan 26, 2016 11:30 pm
The bends were put on with a home made bender a fellow I work with has. It may not look like much but it works good. when I have some free time I will build a upgraded one. The die has a dimplier to bend the hss.
Attachments
20160106_154434.jpg (42.38 KiB) Viewed 12244 times
Posts:
Joined:
Sat Mar 08, 2014 9:00 pm
Location:
Canada
Tue Jan 26, 2016 11:32 pm
And the die
Attachments
20160106_154444.jpg (51.4 KiB) Viewed 12244 times
Thu Jan 28, 2016 6:30 am
it certainly made a first class bend..
htp invertig 221
