Made that third hand and the torch holder recently to make my work area complete. Learned that if you weld something flat on the Stronghand table the table area will distort downward then return when cool. Need to be careful to not do that again.
- Attachments
-
- Although not unique still useful tools.
- DSCN3915.JPG (63.5 KiB) Viewed 939 times
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
Looks good Brucebruce991 wrote:Made that third hand and the torch holder recently to make my work area complete. Learned that if you weld something flat on the Stronghand table the table area will distort downward then return when cool. Need to be careful to not do that again.
The amp control on the torch, is that linear or rotary? Do you also have a pedal, if so which do you prefer or is dependent on what you're welding
Thanks
Richard
Website
Website
Torch is just a switch. I use pedal mostly, unless I am standing and running a bunch of tack welds. It is the one that came with the Everlast welder I like it but new to me as for my work years we welded without such luxury since we welded in awkward situations around the plant. I do need to practice with the pedal a bit.