[Tedtwofeathers]

I was in need of a new welding trailer. I started with an old livestock trailer.

[Tedtwofeathers]

Some of the process.

[motox]

Ted
now thats a real welding project!
keep up the photos.
looks good
craig

[Tedtwofeathers]

Some of the finished trailer.

[motox]

awesome job
trash to cash
nice job
craig

[Coldman]

It's a great mobile work shop. Well done!
I can't quite see in the photo what you've done with the bobcat exhaust. Is that a vent through the roof?

[Tedtwofeathers]

The exhaust goes through a flex joint then, a muffler then, the roof with a hinged cap.
The bobcat is very quite with the muffler.

[xwrench]

Great job. Well done.
I didn't see any in the pics, might I suggest the addition of a fire extinguisher? just in case...
Cheers.
-Eldon

[Superiorwelding]

Ted,
Now that is a nice, clean and professionally organized trailer! I assume you run your own mobile welding business. Very nice.
-Jonathan

[Coldman]

I bet he has got an extinguisher fitted already.
These projects are always a work in progress. I reckon there are a dozen things he still wants to fit including a fold down bunk and a beer fridge. There's room for them!
Awesome!

[Tedtwofeathers]

Extinguisher is coming but here is a water tank with a pump that I use in brushy areas. The tank is also plumbed to a facet under the fender to wash up after work.

[AndersK]

Cool and very functional!

But why remove the front window? It looked like an older welding helmet on the first two pictures

[arenjenkins]

what muffler did you use?

[jeffBrian]

That turned out nice! Thanks for sharing.

[Poland308]

Was that a muffler from Miller of just one you had.? Nice set up.

[MosquitoMoto]

Very impressive and well thought out.

How much work did it take before the trailer stopped smelling of cow poop?


Kym

[Otto Nobedder]

Cool and very functional!

But why remove the front window? It looked like an older welding helmet on the first two pictures

I see why to lose the window, as no one needs to see what's inside, but this is a fun point... Black metal on the inside of that glass could have let you dress it to look like a welding hood.
I suppose that would also give away what's inside though...

Great work, and a nice setup!

Steve S

[5thGearFab]

Nice job! I'm in the process of making a flat bed with side skirts and storage for tools, for my truck and outfitting it with a possibly a trail blazer for a power source. And a Miller mig, air compressor, and vise. Lots of work around for a guy who can weld mobile. Great work !