1 of 2 itty bitty clamps I made at work one day due to having no other way to do the job.
This is V2. V1 works, but is too pug-fugly to put on the internets...
I *think* it might be made out of some nickle alloy...it was made from scraps pulled out of the iron worker drop bin...
The puddle was real weird when I tacked it together... and we had a sheet of nickel going around the shop when I made these...At the very least its 316 ss.
The screw is a stainless 10-32 with a piece of 1/16" filler fused onto it.
They have served me well on many occasion where no other clamp can do the job quite right.
PlasmaBrain
- PlasmaBrain
-
New Member
-
Posts:
-
Joined:Sat Mar 05, 2016 12:10 pm
- Attachments
-
- clamp in use.jpg (169.33 KiB) Viewed 1944 times
-
- clamp 1.jpg (120.62 KiB) Viewed 1944 times
- ldbtx
-
Heavy Hitter
-
Posts:
-
Joined:Thu Jun 13, 2013 12:54 am
-
Location:North Central Texas
-
Contact:
I like it.
Miller Bobcat 225
Tweco Fabricator 211i
AHP AlphaTIG 200x
Lincoln SP-135+
Hypertherm Powermax 30 Air
ProStar O/A torch
Tweco Fabricator 211i
AHP AlphaTIG 200x
Lincoln SP-135+
Hypertherm Powermax 30 Air
ProStar O/A torch
Set up is the key to a finished job. Make the fixture,makes the job easier. 
Way to out think the problem.
Way to out think the problem.
Everlast 250EX
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
