Charlie337
- Charlie337
-
New Member
-
Posts:
-
Joined:Fri Sep 02, 2016 8:07 pm
Told the guys over at the tig section I'd upload..all is 1" square tubing and 1/2 round stock( except for the axlead which is 5/8)..all GMAW....newbie, and it was my first project..used an evolution 10" "cold cut saw" worked pretty well. Used a miller 252 with .030 and 75/25..
- Attachments
-
- 20160829_200933.jpg (39.49 KiB) Viewed 960 times
-
- 20160829_215925.jpg (51.37 KiB) Viewed 960 times
-
- 20160817_145503.jpg (29.65 KiB) Viewed 969 times