[crxksa]

hi all
i made this welding cart for my new mig welder and my old stick welding machine. i used scarp materials and thing i found laying around my house, like wheels from an old bicycle and some pipes from an old broken trolley.
this took 2 days to build. i don't have an exact plan for this build, as this was yet again a "go with the flow kinda build " but if anyone have any question post down at the comments.


here is the whole build video
https://youtu.be/6j-AVJzPLL4

================================================================
Disclaimer
=======
Use safety protection while welding. i am MakerMan thats why sometime i dont wear safety protections .
================================================================

[Oscar]

hi all
i made this welding cart for my new mig welder and my old stick welding machine. i used scarp materials and thing i found laying around my house, like wheels from an old bicycle and some pipes from an old broken trolley.
this took 2 days to build. i don't have an exact plan for this build, as this was yet again a "go with the flow kinda build " but if anyone have any question post down at the comments.


here is the whole build video
https://youtu.be/6j-AVJzPLL4

================================================================
Disclaimer
=======
Use safety protection while welding. i am MakerMan thats why sometime i dont wear safety protections .
================================================================

Fixed it for you. You're weldome.

[crxksa]

thanks

[AndersK]

Well done, you sure put some planning into that cart.


Real men cut, weld and grind wearing shorts