What welding projects are you working on? Are you proud of something you built?
How about posting some pics so other welders can get some ideas?
How about posting some pics so other welders can get some ideas?
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Made this at tech school last semester and have some good practice. Shearing practice and oxy fuel cutting. 3/16" plate with 1/4" welds that were visibly inspected and weld the pipe in the bottom only to inspect your cut. Some of the welds were poor because I didn't realize someone changed my machine to pulse until after a couple of welds.
- Attachments
-
- image.jpeg (46.98 KiB) Viewed 2160 times
-
- image.jpeg (50.04 KiB) Viewed 2160 times
-
- image.jpeg (34.4 KiB) Viewed 2160 times
-
- image.jpeg (38.82 KiB) Viewed 2160 times
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
That looks like you're coming along nicely.
You mentioned you are too busy to take pics and post because you're teaching other students.
Friendly 2 cents worth of advice. Don't do it. For two reasons:
1. You are a student and your job is to learn and practice. Use every scrap of time in class to extract every bit of knowledge and seat time out of the school and its staff. Be the best you can be when you leave school because once you leave if you're not good enough you will get hungry real quick. "I practice too much" said no welder - ever.
2. If other students are coming to you for advice or help they are stealing from you (time and knowledge). Any popularity you may have for helping them ends when they walk out the front gate and they may end up with a job that was rightfully yours. Dog eats dog. If they want help they can ask the teacher, research themselves or come onto the forum to seek advice. You did, they can too. Doesn't matter how good or bad the teacher or school is, you're in the same boat.
Just tell em you don't know, go ask the teacher.
You mentioned you are too busy to take pics and post because you're teaching other students.
Friendly 2 cents worth of advice. Don't do it. For two reasons:
1. You are a student and your job is to learn and practice. Use every scrap of time in class to extract every bit of knowledge and seat time out of the school and its staff. Be the best you can be when you leave school because once you leave if you're not good enough you will get hungry real quick. "I practice too much" said no welder - ever.
2. If other students are coming to you for advice or help they are stealing from you (time and knowledge). Any popularity you may have for helping them ends when they walk out the front gate and they may end up with a job that was rightfully yours. Dog eats dog. If they want help they can ask the teacher, research themselves or come onto the forum to seek advice. You did, they can too. Doesn't matter how good or bad the teacher or school is, you're in the same boat.
Just tell em you don't know, go ask the teacher.
Flat out like a lizard drinkin'
PhillerTime
- PhillerTime
-
New Member
-
Posts:
-
Joined:Tue Jan 24, 2017 1:15 am
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Nice work. I agree with what Coldman said to you. It's nice to pass on knowledge but while you are learning, you should be trying to absorb everything you can, while you can. You will have a whole career to help up and comers but for now I would add your 2 cents but spend your time wisely. Now lets see some tig welds.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
I will present the other side of the coin here, from my own perspective. I'm forever a student, but I'm not in school.
I have found that I learn as much from teaching as I do from being taught. Teaching a thing forces me to see it under a different light, to think it through as a set of individual sub-skills and bits of knowledge and experience I don't think about when I'm just doing the task.
I would say, as a student doing well enough to be respected by the other students, you need to find a balance between what you learn directly and what you can learn from sharing with and tutoring others.
I would also say, since other students gravitate toward you, you might try to take advantage of supervision/management classes. If you're a natural leader, now's the time to find out and expand on it. It will pay off handsomely later.
Steve S
I have found that I learn as much from teaching as I do from being taught. Teaching a thing forces me to see it under a different light, to think it through as a set of individual sub-skills and bits of knowledge and experience I don't think about when I'm just doing the task.
I would say, as a student doing well enough to be respected by the other students, you need to find a balance between what you learn directly and what you can learn from sharing with and tutoring others.
I would also say, since other students gravitate toward you, you might try to take advantage of supervision/management classes. If you're a natural leader, now's the time to find out and expand on it. It will pay off handsomely later.
Steve S
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Yeah you're right Otto you do learn a lot by tracking others. You notice what you are doing wrong and you tend to do more work or research more to help them.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
In other words...you're suggesting he become a bossholeOtto Nobedder wrote:I will present the other side of the coin here, from my own perspective. I'm forever a student, but I'm not in school.
I have found that I learn as much from teaching as I do from being taught. Teaching a thing forces me to see it under a different light, to think it through as a set of individual sub-skills and bits of knowledge and experience I don't think about when I'm just doing the task.
I would say, as a student doing well enough to be respected by the other students, you need to find a balance between what you learn directly and what you can learn from sharing with and tutoring others.
I would also say, since other students gravitate toward you, you might try to take advantage of supervision/management classes. If you're a natural leader, now's the time to find out and expand on it. It will pay off handsomely later.
Steve S
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Jeff there is a difference between a boss and a bosshole. I know what a bosshole is and strive to be the opposite of that. Somebdy has to be a boss. Not a good time for me though-too much paperwork.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
All the body parts got together and had a meeting one day to decide who was going to be boss.
The brain said he should be boss because of his intelligence and decision making ability,
the heart said he should be boss because he pumped life giving blood all over the body,
the lungs said he should be boss because he gives air to the other parts,
the legs said he should be boss because without them the body would go nowhere.
Then the rectum piped up and said he wanted to be boss, at this all the other parts laughed and laughed. This made the rectum very angry so he closed up.
After some days had passed the legs became wobbly at the knees, the lungs were panting and gasping, the heart was palpitating and the brain became all fuzzy and confused. In the end they couldn't stand it anymore and cried out to the rectum "OK OK we give in, you can be the boss".
Which just goes to show that to be the boss you don't have to be a brain, just an asshole.
The brain said he should be boss because of his intelligence and decision making ability,
the heart said he should be boss because he pumped life giving blood all over the body,
the lungs said he should be boss because he gives air to the other parts,
the legs said he should be boss because without them the body would go nowhere.
Then the rectum piped up and said he wanted to be boss, at this all the other parts laughed and laughed. This made the rectum very angry so he closed up.
After some days had passed the legs became wobbly at the knees, the lungs were panting and gasping, the heart was palpitating and the brain became all fuzzy and confused. In the end they couldn't stand it anymore and cried out to the rectum "OK OK we give in, you can be the boss".
Which just goes to show that to be the boss you don't have to be a brain, just an asshole.
Flat out like a lizard drinkin'
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
It's usually the laziest, ass kissing, lying, throw you under the bus and climb over your back biggest jag bag on the whole job. My former union "brothers" are famous for it. I'm too old and cranky to tolerate a bosshole anymore so I'll just continue to peck shit with the chickensPoland308 wrote:Some special people have a natural born gift for being a Bosshole! There's no denying that.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Thank you cold man for that insight on bosses. Couldn't stop laughing.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Work places are like septic tanks...the biggest pieces of shit rise to the top.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Yep, I've experienced bossholes before. Often. Thank goodness I don't deal with that now. My shop manager and the company owner have become friends I can rely on, though we intentionally don't associate outside of work (except maybe lunch). We all know how and why to keep those boundaries. They've come to trust my judgement in almost any issue (though when we disagree, their judgement is final, of course, and there's never an argument, just healthy debate), and are very good at rewarding my efforts. Most of the crew are given tasks, where I'm usually given a list of goals (and their relative priorities) to meet in the order and method I find most efficient.
I wouldn't trade this job for 4X the money with some bosshole.
Steve S
I wouldn't trade this job for 4X the money with some bosshole.
Steve S
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Having like-minded people on the same page does wonders for morale. It's nice to have a say-so in the daily workload and have your superiors value your opinion. If I was to ever go to work for someone again, your situation sounds like exactly what I would like to be involved with. Until then...peck peck peckOtto Nobedder wrote:Yep, I've experienced bossholes before. Often. Thank goodness I don't deal with that now. My shop manager and the company owner have become friends I can rely on, though we intentionally don't associate outside of work (except maybe lunch). We all know how and why to keep those boundaries. They've come to trust my judgement in almost any issue (though when we disagree, their judgement is final, of course, and there's never an argument, just healthy debate), and are very good at rewarding my efforts. Most of the crew are given tasks, where I'm usually given a list of goals (and their relative priorities) to meet in the order and method I find most efficient.
I wouldn't trade this job for 4X the money with some bosshole.
Steve S
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
- MinnesotaDave
-
Weldmonger
-
Posts:
-
Joined:Sun Oct 27, 2013 10:57 pm
-
Location:Big Lake/Monticello MN, U.S.A.
Ah damn....hard to get a good boss like that!!Coldman wrote:All the body parts got together and had a meeting one day to decide who was going to be boss.
The brain said he should be boss because of his intelligence and decision making ability,
the heart said he should be boss because he pumped life giving blood all over the body,
the lungs said he should be boss because he gives air to the other parts,
the legs said he should be boss because without them the body would go nowhere.
Then the rectum piped up and said he wanted to be boss, at this all the other parts laughed and laughed. This made the rectum very angry so he closed up.
After some days had passed the legs became wobbly at the knees, the lungs were panting and gasping, the heart was palpitating and the brain became all fuzzy and confused. In the end they couldn't stand it anymore and cried out to the rectum "OK OK we give in, you can be the boss".
Which just goes to show that to be the boss you don't have to be a brain, just an asshole.
Dave J.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
i was a boss for 35 plus years and the only times
i had to be a bosshole was when my crews needed
to get their heads out of their own workholes.
Craig
i had to be a bosshole was when my crews needed
to get their heads out of their own workholes.
Craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
- Granddaddy
-
Guide
-
Posts:
-
Joined:Mon Feb 13, 2017 4:53 pm
-
Location:NW Fla
+ one, many times while laying a job out or discussing a procedure with the team a light will come on and I'll suddenly think of a better way of getting it done.Otto Nobedder wrote:I will present the other side of the coin here, from my own perspective. I'm forever a student, but I'm not in school.
I have found that I learn as much from teaching as I do from being taught. Teaching a thing forces me to see it under a different light, to think it through as a set of individual sub-skills and bits of knowledge and experience I don't think about when I'm just doing the task.
I would say, as a student doing well enough to be respected by the other students, you need to find a balance between what you learn directly and what you can learn from sharing with and tutoring others.
I would also say, since other students gravitate toward you, you might try to take advantage of supervision/management classes. If you're a natural leader, now's the time to find out and expand on it. It will pay off handsomely later.
Steve S
the heck with the duty cycle on the welder, tell me about the duty cycle on that grinder !!
Return to “Welding Projects - Welding project Ideas - Welding project plans”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities