This one I welded from scratch. The vice goes in the stand in my previous projects thread.
![Image](http://i51.photobucket.com/albums/f354/rahtreelimbs/tools2004.jpg)
This one was a base to an oven at my previous employer in Ga. I added the top, wheels and riser legs. Even with the drillpress this table is great for sitdown work on small parts. You will also notice a ground wire wrapped up on this table (you can see the wire passing thru the bottom tube) and on the one in the background. I did this before I extended the ground on my HTP 221 welder.....it also works to ground my plasma cutter!
![Image](http://i51.photobucket.com/albums/f354/rahtreelimbs/tools2003.jpg)
I tend to go against the norm on some things...........case in point this bottle holder for my argon. None of my TIG machines (3 in all) are on carts. Two have 25 ft. torch hoses (with ground extensions) and one has a 12 ft. hose. You will notice I have a spliiter valve on this bottle and quick connects. I also have a 50 ft. hose and a quick connect on my Lincoln MIG welder for running a spoolgun !
![Image](http://i51.photobucket.com/albums/f354/rahtreelimbs/tools2006.jpg)