Burn-in via Miller Dynasty 200DX and CK Worldwide 18-series torch with 1/8" GREEN Tungsten (micro-ball) and 3/32" 4943 filler. 165A, 110Hz with 68/32 balance and 75Ar/He25 shielding. Normally, we use BLUE Tungsten for Ally work but decided to rock the GREEN Tungsten with spherical ends. Old school. All joint edges were profiled at 45deg to 2/3 the depth of the HSS thickness with a Dynabrade (no. 52325) air powered grinder and carbide cutter. CJP (complete joint penetration) to facilitate max fusion and filler wetout. All welds sanded flush with scotch-brited Rolocs, less the interior fillets.
Our client is spraying the assembly with a primer/paint to complement the look of his lake house. Plus, client will be drilling water escape hole prior to surface finish to mitigate internal corrosion.
* Moderators * appreciate image rotations, as pictures were captured in "square" mode for Instagram. Thanks!
- IMG_6794.JPG (62.14 KiB) Viewed 940 times
- IMG_6796.JPG (42.29 KiB) Viewed 940 times
- IMG_6846.JPG (57.28 KiB) Viewed 940 times
- IMG_6868.JPG (44.11 KiB) Viewed 940 times
