[Oscar]

For my rod tubes, I made double removable end-caps to take the stubbies out. No stubbie is safe!

[electrode]

That will work. Jody has a dual cap setup for different length rods from what I remember in one of his videos. You improved on it. I use all my stubbies asap when I can for little insignificant welds or tacks before I grab a new rod.

[exnailpounder]

That will work. Jody has a dual cap setup for different length rods from what I remember in one of his videos. You improved on it. I use all my stubbies asap when I can for little insignificant welds or tacks before I grab a new rod.

I could make a joke right here about you using your stubbie...but I won't

[electrode]

That will work. Jody has a dual cap setup for different length rods from what I remember in one of his videos. You improved on it. I use all my stubbies asap when I can for little insignificant welds or tacks before I grab a new rod.

I could make a joke right here about you using your stubbie...but I won't

That's my other stubby. And I also use it asap when the occasion arises.

[exnailpounder]

[Otto Nobedder]

... when the occasion arises.

Was that an intentional choice of words?



Steve S

[electrode]

... when the occasion arises.

Was that an intentional choice of words?



Steve S

Yes.

[Otto Nobedder]

... when the occasion arises.

Was that an intentional choice of words?



Steve S

Yes.

Brilliant. Well done, you!

Steve S

[pscampsr]

Sweeeeet!

[Wolfgang]

Here is the setup under my welding table.

[LtBadd]

Here is the setup under my welding table.

Looks good

[exnailpounder]

Here is the setup under my welding table.

Looks good

Machinist! Gotta be. Welders just aren't that organized

[electrode]

Looks great. You must be a machinist.

[bigfabdaddy]

I need to build something to hold all the different rods that I have ordered that will be laying around for now.

[electrode]

I need to build something to hold all the different rods that I have ordered that will be laying around for now.

Make many more tubes than you think you will need. I need to add some to the outside of my carts already.

[LtBadd]

Typical non machinist setup

Rod Holder.jpg (61.26 KiB) Viewed 2131 times

[exnailpounder]

Your's is in tubes? Mine is in the recycled tubes that Radnor puts their junk in. My new LWS sells rod by the pound and puts it in bags...sometimes I take it out...sometimes I don't take it out. I just opened a 30 year old box of 4043 rods I got from a retired welder and they work better than the 4043 I just bought new a month ago. Must be the China syndrome.

[LtBadd]

Your's is in tubes? Mine is in the recycled tubes that Radnor puts their junk in. My new LWS sells rod by the pound and puts it in bags...sometimes I take it out...sometimes I don't take it out. I just opened a 30 year old box of 4043 rods I got from a retired welder and they work better than the 4043 I just bought new a month ago. Must be the China syndrome.

ya gotta have tubes!! come on Jeff get with the program...

[One of a kind]

Here's how I made my rod holder. I used old rectangular tube I saved for such a job. I Blasted the paint off with my HF Blasting cabinet, it did a great job even though the media I was using was medium/fine glass bead.

[exnailpounder]

NIce!

[electrode]

+1 Very nice job on those.

[One of a kind]

Thanks guys. I have to keep projects simple because of my limited mobility.