Page 1 of 1
10 ton portable press
Posted: Sun Feb 12, 2017 11:46 pm
by One of a kind
The risers are 3X 3/16 square, the platen is 4" heavy channel. The one rolled channel's flange had to be milled, brought down with heavy clamps and re-welded so the flange would be at the same elevation as the other side's flange. My SIL welded it, but I taught him though.
http://s1298.photobucket.com/user/cyber ... er%20Press
http://s1298.photobucket.com/user/cyber ... ort=2&o=34
Re: 10 portable press
Posted: Mon Feb 13, 2017 11:24 am
by electrode
Looks great. And two tone paint job to boot. I like the hydraulic power pack, where did you get that and how much was it?
Re: 10 portable press
Posted: Mon Feb 13, 2017 12:29 pm
by One of a kind
electrode wrote:Looks great. And two tone paint job to boot. I like the hydraulic power pack, where did you get that and how much was it?
Thanks electrode. Sorry I couldn't post individual pictures of the project, but the website won't allow MP4 videos, so I had to link to my photobucket account.
Here's the link to the pump, I bought mine last summer for the same money.
http://www.ebay.com/itm/10-000-PSI-10-T ... 56&vxp=mtr
My Black Hawk porta power is a 1995 ish model, yours might not need an adapter to hook the cylinder to the pump. I needed one, It took awhile to get to me, I thinking around three weeks, but it was only $21 and change when I bought mine.
http://www.ebay.com/itm/3-8-Hydraulic-C ... 2453917922
Re: 10 portable press
Posted: Mon Feb 13, 2017 3:01 pm
by electrode
One of a kind wrote:electrode wrote:Looks great. And two tone paint job to boot. I like the hydraulic power pack, where did you get that and how much was it?
Thanks electrode. Sorry I couldn't post individual pictures of the project, but the website won't allow MP4 videos, so I had to link to my photobucket account.
Here's the link to the pump, I bought mine last summer for the same money.
http://www.ebay.com/itm/10-000-PSI-10-T ... 56&vxp=mtr
My Black Hawk porta power is a 1995 ish model, yours might not need an adapter to hook the cylinder to the pump. I needed one, It took awhile to get to me, I thinking around three weeks, but it was only $21 and change when I bought mine.
http://www.ebay.com/itm/3-8-Hydraulic-C ... 2453917922
No worries on the extra pics, I watched the slideshow on your PB account. You can always link to the mp4 on you tube in the future. Thanks for the info on the pump and the adapter.
Re: 10 ton portable press
Posted: Mon Feb 13, 2017 3:18 pm
by One of a kind
Glad I could help.
Re: 10 ton portable press
Posted: Sun Feb 19, 2017 9:27 am
by motox
guide bearing are a great touch!
Craig
Re: 10 ton portable press
Posted: Sun Feb 19, 2017 12:15 pm
by One of a kind
motox wrote:guide bearing are a great touch!
Craig
Craig, they work so well I'm going top put them on my homemade 50-ton press too.