Page 1 of 1
Plasma cart
Posted: Wed Mar 08, 2017 5:03 pm
by Mihtu
On the cheap cart,first thing I ever built using tig,and aluminum!
Re: Plasma cart
Posted: Wed Mar 08, 2017 5:08 pm
by dmcnally
Congratulations and nice job!
Dave
Re: Plasma cart
Posted: Wed Mar 08, 2017 5:08 pm
by exnailpounder
Nice! Really like the pneumatic all terrains!
Re: Plasma cart
Posted: Wed Mar 08, 2017 5:10 pm
by Mihtu
You know,I got tire of hitting a pebble with the mig cart,and almost dumping it,or a hose,etc,it does roll nicely
Re: Plasma cart
Posted: Wed Mar 15, 2017 2:11 pm
by Glidertow
Nice job. What method did you use to bend the tubing?
Re: Plasma cart
Posted: Sun Mar 19, 2017 5:01 pm
by Mihtu
I made a bender out of scrap to bend the 1/8th wall square tube,I saw a picture of one,and built what I saw in the picture,works pretty good !, You do need some preheat on the thicker wall tube though!
Re: Plasma cart
Posted: Sun Mar 19, 2017 7:46 pm
by LtBadd
Mihtu wrote:I made a bender out of scrap to bend the 1/8th wall square tube,I saw a picture of one,and built what I saw in the picture,works pretty good !, You do need some preheat on the thicker wall tube though!
Would be very interested in seeing photo's of you bending the square tube
Re: Plasma cart
Posted: Mon Mar 20, 2017 11:48 am
by Mihtu
I will post some pictures tonight,I am going to build a new mig cart,the one I have is a turd! So I will be bending some tubing for that one!