Burley Industries
- Burley Industries
-
Active Member
-
Posts:
-
Joined:Fri Dec 15, 2017 4:43 pm
-
Location:Boise, Idaho
For my wife's birthday a month back I built this 'coffee cart'. It's sort of a multi-functioning piece. It houses our water cooler as well as adds additional countertop space for our coffee marker and cups.
Jake Burley
@burleyindustriesllc
@burleyindustriesllc
Burley Industries
- Burley Industries
-
Active Member
-
Posts:
-
Joined:Fri Dec 15, 2017 4:43 pm
-
Location:Boise, Idaho
Here it is
- Attachments
-
- 20180414_150411.jpg (76.69 KiB) Viewed 1581 times
Jake Burley
@burleyindustriesllc
@burleyindustriesllc
Burley Industries
- Burley Industries
-
Active Member
-
Posts:
-
Joined:Fri Dec 15, 2017 4:43 pm
-
Location:Boise, Idaho
Coffee cart on top
- Attachments
-
- 20180414_145756.jpg (51.48 KiB) Viewed 1581 times
Jake Burley
@burleyindustriesllc
@burleyindustriesllc
Burley Industries
- Burley Industries
-
Active Member
-
Posts:
-
Joined:Fri Dec 15, 2017 4:43 pm
-
Location:Boise, Idaho
With the water cooler installed
- Attachments
-
- 20180428_115544.jpg (94.65 KiB) Viewed 1581 times
Jake Burley
@burleyindustriesllc
@burleyindustriesllc
Burley Industries
- Burley Industries
-
Active Member
-
Posts:
-
Joined:Fri Dec 15, 2017 4:43 pm
-
Location:Boise, Idaho
A few detailed shots
- Attachments
-
- 20180414_153038.jpg (45.9 KiB) Viewed 1579 times
-
- 20180414_152955.jpg (56.8 KiB) Viewed 1579 times
-
- 20180414_153002.jpg (69.54 KiB) Viewed 1579 times
Jake Burley
@burleyindustriesllc
@burleyindustriesllc
Burley Industries
- Burley Industries
-
Active Member
-
Posts:
-
Joined:Fri Dec 15, 2017 4:43 pm
-
Location:Boise, Idaho
motox wrote:Burley
are you using gun and bucking bar on the rivets
or just tac welding the backs?
craig
They start as carriage bolt. I chuck them up in the drill and smooth the head on the belt sander. I then cut the head off leaving the square shoulder. I drill a hole big enough for the shoulder to fit in and them tig weld the back side and grind smooth. It's a lot of work but it's the cheapest way and allows for all different sizes.
Jake Burley
@burleyindustriesllc
@burleyindustriesllc