[tryn2fab]

Hello everyone, I'm new here and just thought I would post up my projects I do. Any feedback on what I build would be perfect and anything I can do to improve would be great! I use a MM175 set up on a C25 mix and run .030 wire
My latest sidejob was a rear bumper with tire carrier for a wrangler

pic is kind of blury on this one





thanks for any feedback, the only thing that is concerning me really is the mounting plate I bought premade and are 3/4" thick, I welded it for the 1/4" setting and just held it on the 3/4" plate longer. Still got the blueing way into the plate so I'm not too concerned with it.

[jtybt]

I'm curious what the farm jack was for.

[TURYSAN]

the farm jack is just standard equipment on 4x4s and thats just one place to hold it.
and it really looks solid......good job.
TS.

[tigamajig]

"farm jack"....you live near some pretty smart farmers if they have Hi-lift jacks on the trucks, you see them in all the 4x4 magazines...they are super useful for pushing ,lifting and pulling.