Page 1 of 1

Fab projects

Posted: Wed Feb 17, 2010 6:01 am
by tryn2fab
Hello everyone, I'm new here and just thought I would post up my projects I do. Any feedback on what I build would be perfect and anything I can do to improve would be great! I use a MM175 set up on a C25 mix and run .030 wire
My latest sidejob was a rear bumper with tire carrier for a wrangler
Image
pic is kind of blury on this one
Image
Image
Image
Image
Image
thanks for any feedback, the only thing that is concerning me really is the mounting plate I bought premade and are 3/4" thick, I welded it for the 1/4" setting and just held it on the 3/4" plate longer. Still got the blueing way into the plate so I'm not too concerned with it.

Re: Fab projects

Posted: Tue Mar 09, 2010 12:01 am
by jtybt
I'm curious what the farm jack was for.

Re: Fab projects

Posted: Wed Mar 17, 2010 9:28 pm
by TURYSAN
the farm jack is just standard equipment on 4x4s and thats just one place to hold it.
and it really looks solid......good job.
TS.

Re: Fab projects

Posted: Sun Jun 06, 2010 6:18 pm
by tigamajig
"farm jack"....you live near some pretty smart farmers if they have Hi-lift jacks on the trucks, you see them in all the 4x4 magazines...they are super useful for pushing ,lifting and pulling.