I made it mostly from scrap, or what I like to call offcuts
.The terminator had red led for eyes that were started when anyone came close to it by a pir.
Just thought I'd share this as a bit of light hearted fun
andygmac
- andygmac
-
Active Member
-
Posts:
-
Joined:Sun Jan 26, 2014 5:44 am
-
Location:Suffolk England
Here is a terminator that I made for the local village scarecrow hunt.
I made it mostly from scrap, or what I like to call offcuts .
The terminator had red led for eyes that were started when anyone came close to it by a pir.
Just thought I'd share this as a bit of light hearted fun
I made it mostly from scrap, or what I like to call offcuts
.The terminator had red led for eyes that were started when anyone came close to it by a pir.
Just thought I'd share this as a bit of light hearted fun
- Attachments
-
- IMG_94823159676005.jpeg (85.62 KiB) Viewed 1102 times
delraydella
- delraydella
-
Weldmonger
-
Posts:
-
Joined:Mon Apr 25, 2011 7:35 pm
-
Location:Detroit, MI
That looks great! Nice work!
Other Steve
Other Steve
Welding☞Syncrowave 250,Millermatic 252,30a Spoolgun Cutting☞12" Hi-speed Cutoff Saw, 9x 12 Horizontal Bandsaw Milling☞Gorton 8d Vertical Mill Turning☞Monarch EE Precision Lathe Grinding ☞Brown & Sharpe #5 Surface Grinder
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Tim Burton crosses "tin man" with "scarecrow" in new movie, in Frankenwizard of Halloweentown....
Nice work!
Steve S
Nice work!
Steve S