Page 1 of 1
Cast repair
Posted: Mon Mar 03, 2014 9:34 pm
by power
Walking the cup on some cast iron repair I did. 309L Stainless filler 3/32 red tungsten DC.
Re: Cast repair
Posted: Mon Mar 03, 2014 10:31 pm
by Superiorwelding
power,
Looks good! Let us know your process for this repair.
-Jonathan
Re: Cast repair
Posted: Tue Mar 04, 2014 8:05 am
by power
Superiorwelding wrote:power,
Looks good! Let us know your process for this repair.
-Jonathan
Thank you. I use a warming plate to warm the cast to the touch, no torch or fast heat, use a gas lenses 20-25 gas psi argon, go very very slow. 3/32 red 1/16 309 ss filler dc setting I cant tell you amps specifically I just float the pedal maybe 180-225?