Page 1 of 1

ive yet to post my progress...

Posted: Tue Aug 10, 2010 1:13 am
by gurew
i have about 5 months total welding experience, id say that my welding skills have gotten really good, really fast...im going to stick to this for making a living now...

Image
Image
Image

some tricky aluminum welding... -4 AN weld fitting to a -6 AN aluminum fuel tube piece
Image
Image

Image

Image

and finally some 308 stainless sch40 pipe, 3/32 tungsten, runners are 56amp single pass with 1/32 filler on the runners and collectors, 6 beads at a time

then on the flange its 2 passes at 200 amps, 6 beads at a time. now my cup size is huge, i use the ck gas saver with clear lense...they break easy but damn its such a nice cup to have, low profile and very very wide...lots of coverage to get the deep colors

Image
Image

Re: ive yet to post my progress...

Posted: Thu Dec 02, 2010 11:22 pm
by rick_barter
Nice welds. Is that a Synchrowave 250? What size breaker are you running it off of?