Large crane
Posted: Thu May 01, 2014 10:06 pm
- DSCN1797 CRANE NUMBER !!!!!!!!!.JPG (87.43 KiB) Viewed 1282 times
- DSCN1800 CRANE ###### %%%%%%.JPG (87.02 KiB) Viewed 1282 times
Page 1 of 1
Re: Large crane
Posted: Thu May 01, 2014 10:10 pm
- IMG_1714.JPG (103.02 KiB) Viewed 1280 times
- IMG_1724.JPG (164.92 KiB) Viewed 1280 times
Re: Large crane
Posted: Thu May 01, 2014 10:15 pm
John,
Is this your latest find? That will be handy to have around. Looks custom made, never seen one built quite like that before.
-Jonathan
Is this your latest find? That will be handy to have around. Looks custom made, never seen one built quite like that before.
-Jonathan
Re: Large crane
Posted: Thu May 01, 2014 10:19 pm
You want to come up and help me set it up??
My buddy had it, and I did some bartering for it.
Drove up to his place and brought it home.
Has a 3 ton chainfall on a trolly.
It's 14ft high, and 20ft wide.
My buddy had it, and I did some bartering for it.
Drove up to his place and brought it home.
Has a 3 ton chainfall on a trolly.
It's 14ft high, and 20ft wide.
Re: Large crane
Posted: Thu May 01, 2014 10:28 pm
If you were closer, absolutely!AKweldshop wrote:You want to come up and help me set it up??
My buddy had it, and I did some bartering for it.
Drove up to his place and brought it home.
Has a 3 ton chainfall on a trolly.
It's 14ft high, and 20ft wide.
I will get a picture of the one in my garage, looks similar to this one but a lot smaller. Mine started out 14' tall also and I cut it down to 10' to fit in my garage. I have nothing but time and 8 bolts in mine. It was left by the previous occupant of my very first shop, I like freebies.
-Jonathan
-Jonathan
Re: Large crane
Posted: Sun May 04, 2014 9:24 pm
Nice, better than my crane! I have a heavy old horseshoe lag bolted to the rafters and I hooked a 2 ton come along to it 
Crude,ugly, but works for me.
Crude,ugly, but works for me.