Page 1 of 1
3x5 welding table build....Boring....
Posted: Sun May 18, 2014 2:47 am
by AKweldshop
Front grill off a cat dozer.
1/2 in steel.
Rest of the table is 2x2 quare tubing. 1/8 wall.
The rest is raw skill.
- IMG_2397.JPG (69.51 KiB) Viewed 1851 times
- IMG_2398.JPG (101.83 KiB) Viewed 1851 times
- IMG_2399.JPG (63.05 KiB) Viewed 1851 times
Re: 3x5 welding table build....Boring....
Posted: Sun May 18, 2014 2:50 am
by AKweldshop
- IMG_2400.JPG (59.64 KiB) Viewed 1849 times
- IMG_2401.JPG (69.5 KiB) Viewed 1849 times
- IMG_2402.JPG (53.91 KiB) Viewed 1849 times
Re: 3x5 welding table build....Boring....
Posted: Sun May 18, 2014 2:53 am
by AKweldshop
- IMG_2403.JPG (48.63 KiB) Viewed 1848 times
- IMG_2404.JPG (77.66 KiB) Viewed 1848 times
- IMG_2405.JPG (66.6 KiB) Viewed 1848 times
Re: 3x5 welding table build....Boring....
Posted: Sun May 18, 2014 2:54 am
by AKweldshop
- IMG_2406.JPG (74.19 KiB) Viewed 1847 times
- IMG_2407.JPG (65.88 KiB) Viewed 1847 times
More pics tomorrow...
Hope it wasn't to boring....
~John
Re: 3x5 welding table build....Boring....
Posted: Sun May 18, 2014 8:47 pm
by mcoe
Were those some 6013's laying on the floor? Looks nice, I always like taking old stuff and re purposing it. Like the idea of the dozer grill.
Re: 3x5 welding table build....Boring....
Posted: Sun May 18, 2014 9:03 pm
by AKweldshop
Yes,
I started out using 6013.
I got so fn sick of them, I thru them in the trash.
I used 7018 and 8010 for the rest.
I'll get the pics up as soon as possible.
It's finished.
John
Re: 3x5 welding table build....Boring....
Posted: Sun May 18, 2014 9:12 pm
by mcoe
I need to take pictures of our carry all I re did. I welded a hook to the top of it to hook a chain to and did some bracing. I used 7010 and capped with 7018. It turned out pretty good.
Re: 3x5 welding table build....Boring....
Posted: Sun May 18, 2014 11:56 pm
by AKweldshop
Matt,
What do you pay for a 10lb box of Forney 1/8 7018??
Got some math that needs done...
~John
Re: 3x5 welding table build....Boring....
Posted: Mon May 19, 2014 12:21 am
by mcoe
About $20 I do believe. It has been a while since I bought rods because I get them for free from my brother in law mostly now.
Re: 3x5 welding table build....Boring....
Posted: Mon May 19, 2014 9:34 pm
by kermdawg
AKweldshop wrote:Matt,
What do you pay for a 10lb box of Forney 1/8 7018??
Got some math that needs done...
~John
Hey AK I just paid 10 dollars for a 10 pound box of forney 1/8 7018. Clearance at Ace Hardware
who knew welding supplies go on clearance??
Re: 3x5 welding table build....Boring....
Posted: Mon May 19, 2014 10:57 pm
by Superiorwelding
kermdawg wrote:AKweldshop wrote:Matt,
What do you pay for a 10lb box of Forney 1/8 7018??
Got some math that needs done...
~John
Hey AK I just paid 10 dollars for a 10 pound box of forney 1/8 7018. Clearance at Ace Hardware
who knew welding supplies go on clearance??
That's because they were getting rid of the 7018 to make room for the 6013
-Jonathan
Re: 3x5 welding table build....Boring....
Posted: Tue May 20, 2014 7:43 pm
by AKweldshop
- IMG_2410.JPG (104.91 KiB) Viewed 690 times
- IMG_2409.JPG (82.4 KiB) Viewed 690 times
- IMG_2411.JPG (84.02 KiB) Viewed 690 times
Re: 3x5 welding table build....Boring....
Posted: Tue May 20, 2014 7:46 pm
by AKweldshop
- IMG_2412.JPG (93.31 KiB) Viewed 689 times
- IMG_2413.JPG (54.88 KiB) Viewed 689 times
- IMG_2414.JPG (59.47 KiB) Viewed 689 times
Re: 3x5 welding table build....Boring....
Posted: Tue May 20, 2014 7:47 pm
by AKweldshop
- IMG_2416.JPG (92.53 KiB) Viewed 689 times
- IMG_2417.JPG (84.68 KiB) Viewed 689 times