trailer squeezer divider whatchamacallit!!!

AKweldshop · Sun Jul 06, 2014 12:57 am

Had a 4.5 hour job on this cattle stock trailer.
Pics will explain.

Enjoy!!!

~John

: IMG_3874.JPG (85.91 KiB) Viewed 1419 times

So I consulted my metal pile.

: IMG_3875.JPG (203.61 KiB) Viewed 1419 times

And got 6 10' sticks, of 1/16' wall galvi pipe.

Cutting it down to 7'....

: IMG_3876.JPG (99.92 KiB) Viewed 1419 times

AKweldshop · Sun Jul 06, 2014 1:06 am

And the left overs.

: IMG_3877.JPG (85.37 KiB) Viewed 1418 times

Here is a quick tip for you guys (or gals) that make small gates/panels.
Lay a 2x4 on your table, and drive nails in, to make your own stronghand table.
These two here are from prevous panels I've built, but you get the idea.

: IMG_3878.JPG (89.37 KiB) Viewed 1418 times

: IMG_3879.JPG (84.21 KiB) Viewed 1418 times

AKweldshop · Sun Jul 06, 2014 1:10 am

So,
I laid two 2x4's on my table, and laid the pipe on the wood.
Than I drove these small nails, 8" apart.

: IMG_3882.JPG (69.51 KiB) Viewed 1417 times

: IMG_3880.JPG (105.11 KiB) Viewed 1417 times

: IMG_3881.JPG (87.82 KiB) Viewed 1417 times

AKweldshop · Sun Jul 06, 2014 1:15 am

This panel is going to 42" by 72" and for the end pieces, they are 1/8 wall pipe.
Gotta be heavy duty.

: IMG_3883.JPG (76.2 KiB) Viewed 1417 times

: IMG_3884.JPG (99.27 KiB) Viewed 1417 times

: IMG_3885.JPG (82.07 KiB) Viewed 1417 times

AKweldshop · Sun Jul 06, 2014 1:20 am

Great fit on those tubes right???
I'm going to be using a 1/8 8010 rod for this, so its gonna be great!!

So I thought I'd crush the tubes right???

: IMG_3886.JPG (59.83 KiB) Viewed 1417 times

: IMG_3887.JPG (63.81 KiB) Viewed 1417 times

: IMG_3888.JPG (84.66 KiB) Viewed 1417 times

But that didn't, so I'll just have to scrap the entire project.

Sorry for wasting your time....

AKweldshop · Sun Jul 06, 2014 1:22 am

What a bunch of wasted effort!!

Guess I'll try something else now.

Any tips??

John

: IMG_3889.JPG (95.08 KiB) Viewed 1417 times

AKweldshop · Sun Jul 06, 2014 3:17 am

I'll just crimp them enough so that its a decent fit...
And, the tubing is 1/6 wall, as you can see, its quite difficult to stick weld with a 1/8 8010.
Feel free to tell me how ugly it looks, and how poor of quality of work I do....

Go ahead... You know you want to.

: IMG_3896.JPG (80.31 KiB) Viewed 1410 times

: IMG_3897.JPG (86.36 KiB) Viewed 1410 times

: IMG_3898.JPG (90.87 KiB) Viewed 1410 times

AKweldshop · Sun Jul 06, 2014 3:24 am

Keep the hate messages coming...

: IMG_3899.JPG (105.68 KiB) Viewed 1409 times

: IMG_3900.JPG (113.84 KiB) Viewed 1409 times

: IMG_3901.JPG (87.44 KiB) Viewed 1409 times

AKweldshop · Sun Jul 06, 2014 3:27 am

So,
That was frustrating as it gets.

I thought sure I died and went to the wrong place, and was stuck welding burners and boilers....

: IMG_3902.JPG (92.45 KiB) Viewed 1409 times

: IMG_3903.JPG (54.32 KiB) Viewed 1409 times

AKweldshop · Sun Jul 06, 2014 3:31 am

So,
The panel is all welded up.
Its stuck, and not coming apart.

So,
Now I've got to attach it to the trailer...
Pics will explain the rest.

: IMG_3914.JPG (55.59 KiB) Viewed 1409 times

: IMG_3915.JPG (111.12 KiB) Viewed 1409 times

: IMG_3916.JPG (82.88 KiB) Viewed 1409 times

AKweldshop · Sun Jul 06, 2014 3:35 am

So,
Got the welder set up, and leads run into the trailer, amperage about 75amps, pocketfull of 1/8 8010 and 3/32 7018.

: IMG_3917.JPG (115.1 KiB) Viewed 790 times

: IMG_3918.JPG (108.46 KiB) Viewed 790 times

: IMG_3919.JPG (109.21 KiB) Viewed 790 times

AKweldshop · Sun Jul 06, 2014 3:38 am

: IMG_3920.JPG (118.51 KiB) Viewed 790 times

: IMG_3921.JPG (99.96 KiB) Viewed 790 times

: IMG_3922.JPG (100.21 KiB) Viewed 790 times

AKweldshop · Sun Jul 06, 2014 3:40 am

: IMG_3923.JPG (100.91 KiB) Viewed 790 times

: IMG_3924.JPG (73.38 KiB) Viewed 790 times

: IMG_3925.JPG (119.6 KiB) Viewed 790 times

AKweldshop · Sun Jul 06, 2014 3:43 am

: IMG_3926.JPG (143.33 KiB) Viewed 790 times

: IMG_3927.JPG (140.21 KiB) Viewed 790 times

: IMG_3928.JPG (137.17 KiB) Viewed 790 times

AKweldshop · Sun Jul 06, 2014 3:46 am

: IMG_3929.JPG (94.52 KiB) Viewed 790 times

: IMG_3930.JPG (69.31 KiB) Viewed 790 times

: IMG_3931.JPG (111.28 KiB) Viewed 790 times

AKweldshop · Sun Jul 06, 2014 3:48 am

: IMG_3931.JPG (111.28 KiB) Viewed 790 times

: IMG_3973.JPG (129.53 KiB) Viewed 790 times

: IMG_3974.JPG (126.65 KiB) Viewed 790 times

AKweldshop · Sun Jul 06, 2014 3:51 am

: IMG_3975.JPG (129.27 KiB) Viewed 790 times

: IMG_3976.JPG (122.83 KiB) Viewed 790 times

: IMG_3977.JPG (166.83 KiB) Viewed 790 times

AKweldshop · Sun Jul 06, 2014 3:55 am

: IMG_3978.JPG (68.02 KiB) Viewed 790 times

Soooooo...
Got it all done, fully functional, and operational.
And we happened to have a cow in heat, so we thought we'd try it out.

: IMG_3979.JPG (88.08 KiB) Viewed 790 times

And BEHOLD!!!!

It works!!!

: IMG_3980.JPG (105.91 KiB) Viewed 790 times

AKweldshop · Sun Jul 06, 2014 3:56 am

: IMG_3981.JPG (73.9 KiB) Viewed 790 times

: IMG_3982.JPG (29.4 KiB) Viewed 790 times

: IMG_3983.JPG (29.33 KiB) Viewed 790 times

AKweldshop · Sun Jul 06, 2014 4:01 am

I'm not sure how many of you are familiar with artificial incimination, so I won't gruel you with the details.
Feel free to google it.
But this was the main reason we built this stall, as it makes it easy to do our work.

: IMG_3986.JPG (87 KiB) Viewed 790 times

: IMG_3989.JPG (62.63 KiB) Viewed 790 times

: IMG_3990.JPG (71.94 KiB) Viewed 790 times

AKweldshop · Sun Jul 06, 2014 4:05 am

Now,
If you have a toothbrush in your hand while attempting this, you can just about brush the cow's teeth...

: IMG_4001.JPG (50.17 KiB) Viewed 909 times

And it survived its maiden voyage.

We'll see how it holds up....

Thanks for watching.

~John

: IMG_4003.JPG (87.89 KiB) Viewed 909 times

AKweldshop · Sun Jul 06, 2014 4:08 am

Now,
This would've been great for mig, but since all I had was stick, we got it done.

Not pretty, but it will hold.

~~John

Superiorwelding · Sun Jul 06, 2014 1:31 pm

That's what I call working with what you have. Did you try heating the ends before smashing them? I wouldn't have smashed them so far, you only need to smash the ends until you can put a good weld on. Speaking of welds....well....

You need to buy my 252 and that will solve your problems.
-Jonathan

AKweldshop · Sun Jul 06, 2014 1:41 pm

Superiorwelding wrote:That's what I call working with what you have. Did you try heating the ends before smashing them? I wouldn't have smashed them so far, you only need to smash the ends until you can put a good weld on. Speaking of welds....well.... You need to buy my 252 and that will solve your problems.
-Jonathan

Oh,
I only smashed them enough to get a good fit.
They were just fine for fit.

See,
Ship me your welder and that will stop my suffering.

mcoe · Tue Jul 15, 2014 10:34 pm

OH the joys of AI

Nothing like being shoulder deep in a rump roast trying to thread a needle blindly. I hate the ones that kick. And it's always the heifers.