[AKweldshop]

Thought you guys might like this thread.....

Feel free to ask any questions.

~John

The truck came to me as a cab and chassis.
The customer is buying ALL supplies....

IMG_7509.JPG (91.52 KiB) Viewed 9176 times

IMG_7512.JPG (55.47 KiB) Viewed 9176 times

IMG_7519.JPG (65.8 KiB) Viewed 9176 times

[AKweldshop]

Time to order metal....
And its here, time to start cutting it up.
3 side plates on each side, 1/2"x 6" flat bar...

IMG_7539.JPG (48.56 KiB) Viewed 9174 times

IMG_7541.JPG (110.78 KiB) Viewed 9174 times

IMG_7552.JPG (79.99 KiB) Viewed 9174 times

[AKweldshop]

I didn't drill any holes in the frame, I used all existing holes.

IMG_7558.JPG (109.16 KiB) Viewed 9172 times

IMG_7582.JPG (62.97 KiB) Viewed 9172 times

IMG_7590.JPG (67.92 KiB) Viewed 9172 times

[AKweldshop]

IMG_7591.JPG (111.28 KiB) Viewed 9171 times

IMG_7603.JPG (83.19 KiB) Viewed 9171 times

IMG_7611.JPG (84.94 KiB) Viewed 9171 times

[AKweldshop]

IMG_7618.JPG (70.7 KiB) Viewed 9169 times

IMG_7623.JPG (94.78 KiB) Viewed 9169 times

IMG_7624.JPG (98.09 KiB) Viewed 9169 times

[AKweldshop]

IMG_7632.JPG (96.24 KiB) Viewed 9168 times

IMG_7654.JPG (90.87 KiB) Viewed 9168 times

IMG_7656.JPG (60.16 KiB) Viewed 9168 times

[AKweldshop]

IMG_7659.JPG (68.67 KiB) Viewed 9167 times

IMG_7663.JPG (65 KiB) Viewed 9167 times

[AKweldshop]

IMG_7667.JPG (83.69 KiB) Viewed 9166 times

IMG_7675.JPG (40.92 KiB) Viewed 9166 times

IMG_7733.JPG (66.95 KiB) Viewed 9166 times

[AKweldshop]

IMG_7742.JPG (59.75 KiB) Viewed 9165 times

IMG_7746.JPG (71.9 KiB) Viewed 9165 times

IMG_7752.JPG (71.26 KiB) Viewed 9165 times

[AKweldshop]

To be continued at a better time.

~John

[Superiorwelding]

John,
I really like your build. To clue everyone in, I have already been following John's build and helping where I can on it. I like the fact that John is building this bed from scratch, no prints at all. In my opinion that shows some skill and forethought. Can't wait to see the finished product!
-Jonathan

[Wes917]

Looks good so far, only thing I don't like is the bolts through the frame. Are those going to stay. If so they should be a little longer. Or maybe it's the pictures?

[AKweldshop]

Looks good so far, only thing I don't like is the bolts through the frame. Are those going to stay. If so they should be a little longer. Or maybe it's the pictures?

They are just started in the nuts.
Just fitting them for now.

They do have 1/2" to 3/4" past a full nut.

Grade 8

[AKweldshop]

I got the 3" channel cut into 95" pieces...

IMG_7801.JPG (95.34 KiB) Viewed 7991 times

IMG_7802.JPG (56.17 KiB) Viewed 7991 times

IMG_7803.JPG (82.92 KiB) Viewed 7991 times

[AKweldshop]

IMG_7806.JPG (88.41 KiB) Viewed 7990 times

IMG_7822.JPG (73.92 KiB) Viewed 7990 times

IMG_7835.JPG (80.74 KiB) Viewed 7990 times

[AKweldshop]

IMG_7851.JPG (48.78 KiB) Viewed 7990 times

IMG_7864.JPG (77.5 KiB) Viewed 7990 times

IMG_7869.JPG (46.83 KiB) Viewed 7990 times

[AKweldshop]

IMG_7883.JPG (90.24 KiB) Viewed 7990 times

IMG_7885.JPG (83.73 KiB) Viewed 7990 times

IMG_7889.JPG (81.88 KiB) Viewed 7990 times

[AKweldshop]

IMG_7897.JPG (94.65 KiB) Viewed 7990 times

IMG_7901.JPG (71.03 KiB) Viewed 7990 times

IMG_7905.JPG (54.29 KiB) Viewed 7990 times

[AKweldshop]

IMG_7919.JPG (69.13 KiB) Viewed 7990 times

IMG_7941.JPG (87.79 KiB) Viewed 7990 times

IMG_7975.JPG (84.07 KiB) Viewed 7990 times

[AKweldshop]

IMG_7997.JPG (76.34 KiB) Viewed 7990 times

IMG_8001.JPG (36.53 KiB) Viewed 7990 times

IMG_8012.JPG (81.09 KiB) Viewed 7990 times

[AKweldshop]

To be continued at a later date.

~John

IMG_8076.JPG (63.81 KiB) Viewed 8110 times

IMG_8077.JPG (92.78 KiB) Viewed 8110 times

[AKweldshop]

IMG_8098.JPG (50.95 KiB) Viewed 8103 times

IMG_8102.JPG (74.13 KiB) Viewed 8103 times

IMG_8103.JPG (42.31 KiB) Viewed 8103 times

[AKweldshop]

IMG_8110.JPG (50.68 KiB) Viewed 8104 times

IMG_8117.JPG (68.19 KiB) Viewed 8104 times

IMG_8143.JPG (89.66 KiB) Viewed 8104 times

[AKweldshop]

IMG_8256.JPG (76.42 KiB) Viewed 8103 times

IMG_8306.JPG (50.31 KiB) Viewed 8103 times

IMG_8319.JPG (96.19 KiB) Viewed 8103 times

[AKweldshop]

IMG_8322.JPG (46.83 KiB) Viewed 8104 times

IMG_8388.JPG (55.15 KiB) Viewed 8104 times

IMG_8447.JPG (72.05 KiB) Viewed 8104 times