Page 1 of 1
Quick project to finish a project
Posted: Mon Oct 13, 2014 1:46 pm
by dsmabe
- 20141013_121045.jpg (43.11 KiB) Viewed 1332 times
- 20141013_121056.jpg (42.04 KiB) Viewed 1332 times
Between work and everything else I've been trying to spend a little time welding a few projects. One of them required me to buy some more clamps. Turns out even the ones i bought, 1 needed to have a deeper reach. So i cut one and added a few inches to it.
Re: Quick project to finish a project
Posted: Mon Oct 13, 2014 1:58 pm
by TRACKRANGER
Nothing wrong with that. Probably cheaper too!
Re: Quick project to finish a project
Posted: Mon Oct 13, 2014 2:20 pm
by dsmabe
I picked up a 2 pack from tractor supply for $10. It came with the one i welded and the one you see on the left off the picture.
Not the highest quality but it gets the job done.
Re: Quick project to finish a project
Posted: Mon Oct 13, 2014 6:35 pm
by motox
whatever it takes, good job!