All in one portable cart, tool box, fold down weld table.
Posted: Mon Dec 08, 2014 1:26 am
About me... I'm pretty much a hack part time hobbyist weekend welder, but I love creating stuff so I keep at it.
A while back I was browsing the interweb looking for a mig welding cart. I didn't find anything that motivated me to make the plunge but I did see a weld cart/tool box from Northern Tools that got the creating juices flowing.
I started with an old Craftsman rolling tool cart, I built a frame around it with 2" x 1/8" angle iron, added a platform to hold the tank, then mounted a piece of scrap plate steel on hinges to create a fold down portable weld table.
It's not pretty but it's practical.
![Image](https://lh5.googleusercontent.com/-SosT30OmT9A/VIU0fzyhoyI/AAAAAAAABRU/r4r5M_GiB4U/w737-h553-no/IMG_1533.JPG)
![Image](https://lh4.googleusercontent.com/-Tlh8YV1au6M/VIU0gEyLAGI/AAAAAAAABRY/kCRGViqiHLo/w737-h553-no/IMG_1534.JPG)
![Image](https://lh4.googleusercontent.com/-SX9xGdboJhs/VIU0gNnQDvI/AAAAAAAABRc/HpePI9nVVY4/w415-h553-no/IMG_1535.JPG)
![Image](https://lh4.googleusercontent.com/-F8Sapp8_haA/VIU0hZtC8EI/AAAAAAAABRo/s2Kl2pWYpqE/w737-h553-no/IMG_1536.JPG)
![Image](https://lh6.googleusercontent.com/-kZNZQWZ69bs/VIU0iWFggZI/AAAAAAAABR4/8AiwHGEwgoQ/w737-h553-no/IMG_1539.JPG)
![Image](https://lh5.googleusercontent.com/-wMPkUpuNX-A/VIU0jGWZ8bI/AAAAAAAABR8/JguX7BRdI8s/w415-h553-no/IMG_1540.JPG)
A while back I was browsing the interweb looking for a mig welding cart. I didn't find anything that motivated me to make the plunge but I did see a weld cart/tool box from Northern Tools that got the creating juices flowing.
I started with an old Craftsman rolling tool cart, I built a frame around it with 2" x 1/8" angle iron, added a platform to hold the tank, then mounted a piece of scrap plate steel on hinges to create a fold down portable weld table.
It's not pretty but it's practical.