Mini C clamp
Posted: Tue Mar 15, 2016 9:48 pm
1 of 2 itty bitty clamps I made at work one day due to having no other way to do the job.
This is V2. V1 works, but is too pug-fugly to put on the internets...
I *think* it might be made out of some nickle alloy...it was made from scraps pulled out of the iron worker drop bin...
The puddle was real weird when I tacked it together... and we had a sheet of nickel going around the shop when I made these...At the very least its 316 ss.
The screw is a stainless 10-32 with a piece of 1/16" filler fused onto it.
They have served me well on many occasion where no other clamp can do the job quite right.
This is V2. V1 works, but is too pug-fugly to put on the internets...
I *think* it might be made out of some nickle alloy...it was made from scraps pulled out of the iron worker drop bin...
The puddle was real weird when I tacked it together... and we had a sheet of nickel going around the shop when I made these...At the very least its 316 ss.
The screw is a stainless 10-32 with a piece of 1/16" filler fused onto it.
They have served me well on many occasion where no other clamp can do the job quite right.