General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
noddybrian
- noddybrian
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 12:13 pm
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
I'll admit to being a little self-absorbed with health issues. Not just my own. My wife and I now live with her sister and our brother-in-law. I'm now the least crippled person in the house. It works out well enough, as these people are family before they are in-laws. They see to all our needs as well as our reasonable wants, and we essentially serve as care-givers. My skills have saved them thousands of dollars, and I'm a pretty good cook, too.
I'm currently working to put together a small but quality home recording studio so I can work from home selling voiceover services (Radio ads, narrations, audiobooks, and the like). It will require a better microphone than I used on the podcast, and I'll have to use my actor's voice instead of the unrestrained voice y'all heard.
Bak to the health thing, I still don't have a diagnosis. I do have familiarity and predictability. I can sense and predict what effects may come when I have an "outburst", for want of a better word. This gives me a chance to take actions to minimize the effects so I can keep moving forward.
Thanks for noticing my unexpected appearance. It means more ot me than I can say just to have someone acknowledge me for showing up.
Steve
I'm currently working to put together a small but quality home recording studio so I can work from home selling voiceover services (Radio ads, narrations, audiobooks, and the like). It will require a better microphone than I used on the podcast, and I'll have to use my actor's voice instead of the unrestrained voice y'all heard.
Bak to the health thing, I still don't have a diagnosis. I do have familiarity and predictability. I can sense and predict what effects may come when I have an "outburst", for want of a better word. This gives me a chance to take actions to minimize the effects so I can keep moving forward.
Thanks for noticing my unexpected appearance. It means more ot me than I can say just to have someone acknowledge me for showing up.
Steve
Hi Steve,
very sorry to hear about your health and your family. I thought you were just engrossed with treading the boards. Are you still able to work or is it worse than that?
Vic.
very sorry to hear about your health and your family. I thought you were just engrossed with treading the boards. Are you still able to work or is it worse than that?
Vic.
Flat out like a lizard drinkin'
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Hi, Vic,
I haven't worked since July. One of the issues I'm having is crippling fatigue. It comes in cycles, every 6-10 days, and can last 1-3 days. In between, I can become almost manic.
One thing I suspect, that my GP dismissed out of hand, is a pheocromocytoma. It's a little tumor that grows on one or both adrenal glands, causing one to constantly have too much adrenaline. This fits the high blood pressure, cold sweats, racing heart, racing thoughts and anxiety, and even explains the fatigue, a bit like crashing after a week's cocaine binge (I presume. I never could afford that much coke... )
I could work from home if I had the space. That's why I'm thinking of doing voice work. I can set that up in a medium-size closet.
Steve
I haven't worked since July. One of the issues I'm having is crippling fatigue. It comes in cycles, every 6-10 days, and can last 1-3 days. In between, I can become almost manic.
One thing I suspect, that my GP dismissed out of hand, is a pheocromocytoma. It's a little tumor that grows on one or both adrenal glands, causing one to constantly have too much adrenaline. This fits the high blood pressure, cold sweats, racing heart, racing thoughts and anxiety, and even explains the fatigue, a bit like crashing after a week's cocaine binge (I presume. I never could afford that much coke... )
I could work from home if I had the space. That's why I'm thinking of doing voice work. I can set that up in a medium-size closet.
Steve
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
To all,
We announced this to our Patron supporters and now it's time to announce this here. In addition to the weekly full length episode (which could turn into more each week?) we are getting ready to launch what we are calling "Stubby" episodes. These will be around 10 mins each where we take a question that has been asked of us and give it a quick answer. This is an effort to continue to give back to the community a little more and allows a catalog of episodes that can be quickly listened to (think over your break) and you don't have to listen to a full episode to hear the answer. These are planned to start next month, October 2019 and will post each Wednesday. We hope to make these a daily post (5 a week) but will start out slowly to see how well received they are. Once they start to air let us know what you think!
http://wttpodcast.libsyn.com/
-Jonathan Lewis
We announced this to our Patron supporters and now it's time to announce this here. In addition to the weekly full length episode (which could turn into more each week?) we are getting ready to launch what we are calling "Stubby" episodes. These will be around 10 mins each where we take a question that has been asked of us and give it a quick answer. This is an effort to continue to give back to the community a little more and allows a catalog of episodes that can be quickly listened to (think over your break) and you don't have to listen to a full episode to hear the answer. These are planned to start next month, October 2019 and will post each Wednesday. We hope to make these a daily post (5 a week) but will start out slowly to see how well received they are. Once they start to air let us know what you think!
http://wttpodcast.libsyn.com/
-Jonathan Lewis
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
- Radishfever
-
Guide
-
Posts:
-
Joined:Wed Aug 21, 2019 5:43 pm
-
Location:Cape Cod, MA
Will
Last edited by Radishfever on Wed Oct 02, 2019 1:03 am, edited 1 time in total.
Learning is the best part of life and the most painful
- Radishfever
-
Guide
-
Posts:
-
Joined:Wed Aug 21, 2019 5:43 pm
-
Location:Cape Cod, MA
Signed up to be a Patreon of the podcast.
Last edited by Radishfever on Wed Oct 02, 2019 1:03 am, edited 1 time in total.
Learning is the best part of life and the most painful
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
I presume you mean the archives of the after show?Radishfever wrote: What level Patreon to get the Archives?
Send an email to the podcast and ask weldingtipsandtricks@gmail.com
Richard
Website
Website
- Radishfever
-
Guide
-
Posts:
-
Joined:Wed Aug 21, 2019 5:43 pm
-
Location:Cape Cod, MA
Yes, the Podcast after show.
W
W
Last edited by Radishfever on Wed Oct 02, 2019 1:03 am, edited 1 time in total.
Learning is the best part of life and the most painful
more like a disconnect between the forum and everything elseRadishfever wrote:
It is really odd how there seems to be such a disconnect between the Podcast and the forum.
forums are just old school.
tweak it until it breaks
- Radishfever
-
Guide
-
Posts:
-
Joined:Wed Aug 21, 2019 5:43 pm
-
Location:Cape Cod, MA
Iwww
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Last edited by Radishfever on Wed Oct 02, 2019 1:02 am, edited 1 time in total.
Learning is the best part of life and the most painful
most, if not all, of the guys hang out on Instagram including most of the guests on the podcast.. if you ask via instagram or facebook you will probably get a reply pretty quick.Radishfever wrote:I meant a disconnect because the podcast guys don’t participate in the forum much. There is little to no connection between the podcast and forum.
Good example of the disconnect. I was told to email Jody and them about Patreon. Wouldn’t you think I could just ask here?
And we got to pay money to hear the after-show. That after-show is not explained well on the Patreon page. I thought that by paying every month I was getting access to the after shows and I found out I only get the most recent after show.
Forums might be old school but I’m much older than the forums. Was making good money long before any forums
I paid money hoping to get more education about welding. I’m not kidding about this. Had the most recent unpublished after show playing on the shop stereo. My wife was upstairs and she walked downstairs just to give me a giant eye roll over that guests self love making.
Sent from my iPhone using Tapatalk
very few people hang out here.
as much as i dislike social media, there is a really good welding community on instagram.
tweak it until it breaks
- Radishfever
-
Guide
-
Posts:
-
Joined:Wed Aug 21, 2019 5:43 pm
-
Location:Cape Cod, MA
Thanks Tweake but I'm done,
For Jonathon, Jody and Roy,
Thanks for the podcast but I suspended my pattern contribution a few minutes ago. The after show was not what I thought it was going to be. Also I thought I should have access to the archives also.
I will keep on listening to the podcast but this is my last post and the last time I will read the forum.
For Jonathon, Jody and Roy,
Thanks for the podcast but I suspended my pattern contribution a few minutes ago. The after show was not what I thought it was going to be. Also I thought I should have access to the archives also.
I will keep on listening to the podcast but this is my last post and the last time I will read the forum.
Learning is the best part of life and the most painful
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
I am sorry Radishfever will not be back to this forum. I (we) did not mean to mislead anyone about the after show. Let me explain a few things so members in the future understand a little more.tweake wrote:most, if not all, of the guys hang out on Instagram including most of the guests on the podcast.. if you ask via instagram or facebook you will probably get a reply pretty quick.Radishfever wrote:I meant a disconnect because the podcast guys don’t participate in the forum much. There is little to no connection between the podcast and forum.
Good example of the disconnect. I was told to email Jody and them about Patreon. Wouldn’t you think I could just ask here?
And we got to pay money to hear the after-show. That after-show is not explained well on the Patreon page. I thought that by paying every month I was getting access to the after shows and I found out I only get the most recent after show.
Forums might be old school but I’m much older than the forums. Was making good money long before any forums
I paid money hoping to get more education about welding. I’m not kidding about this. Had the most recent unpublished after show playing on the shop stereo. My wife was upstairs and she walked downstairs just to give me a giant eye roll over that guests self love making.
Sent from my iPhone using Tapatalk
very few people hang out here.
as much as i dislike social media, there is a really good welding community on instagram.
The Welding Tips & Tricks Podcast is a separate company owned by Roy Crumrine, Jody Collier and myself (Jonathan Lewis). While is shares "Welding Tips & Tricks" in the name it is not directly tied to the forum, Jody's YouTube channel, etc, per say. The Podcast is a way the three of us try to give back to the community some of the knowledge we have learned.
Patreon was set up for those who asked how they can support the show and then extended to access to the after show. The after show is, and always has been, the behind the scenes of our lives be it business, personal or whatever. We have no script not do we necessarily talk about the same things each time. The after show is not for everyone and that is okay. If you are a current Patron and you are on our Patreon page you can scroll and see every single episode and aftershow.
As for our participation on the forum. I can't or won't speak for the others but myself I have a super busy schedule and can't be everywhere all the time. I currently run several businesses and a family. I would love to be on here more, and maybe I can be sometime, but for now I check in from time to time and help out when possible. I would like to think I have contributed to the forum over the years, seeing as I have posted here quite a lot, but sometimes it is time for others to carry the torch for a while.
Again, sorry for any confusion, that was not my intent.
Jonathan Lewis
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
That's what I thought, thanks for stopping by JonathanSuperiorwelding wrote:If you are a current Patron and you are on our Patreon page you can scroll and see every single episode and aftershow.Radishfever wrote: And we got to pay money to hear the after-show. That after-show is not explained well on the Patreon page. I thought that by paying every month I was getting access to the after shows and I found out I only get the most recent after show.
Jonathan Lewis
Richard
Website
Website
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
Richard,
I thought Jody did a great job on that one too! I didn't get to listen to it until it was live and was impressed and glad at all he said.
Jonathan Lewis
I thought Jody did a great job on that one too! I didn't get to listen to it until it was live and was impressed and glad at all he said.
Jonathan Lewis
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
Thank you very much!Homemade wrote:Good luck in Texas, Jonathan.
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities