I've got a leak somewhere. I'm gonna go through and Teflon tape everything but the power block. Til then, I am fine to run for 20 minutes then turn it off at the bottle.MosquitoMoto wrote:
Ha!
Every time I pause for more than a minute, I turn it off at the bottle. And I am constantly painting all of my connections with soapy water, checking for leaks.
Resigned to the cost now. Chalk up one more very expensive hobby!
Kym
As for the topic at hand, if I could practice for an entire day, I would. Practice, to me, includes research. So if I could read specs, go over WPS's, test welds, actually weld, watch videos, converse with someone more experienced, I wrap that all in the category of "getting better."
When I was in school, I went over 40 hours a week for the last two months. Up to 10 hours a day, and sometimes when my instructor wasn't there. I would read and do my print reading homework then.