need a drum kit
General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
Not at all. My youngest would drive us crazy with a drum kit.
Man, it is hot here in Texas. Not sure what I was thinking moving down here.
Jonathan
Man, it is hot here in Texas. Not sure what I was thinking moving down here.
Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
I guess that all depends on your perspective and if you are pesimestic or optimistic. For me life is fine. When you really boil things down it could be a LOT worse. Still able to provide a living for my family and enjoy some hobbies so it is not all that bad. For those who might see things as glass half empty, well, it probably doesn't look that great.
As with all things in life, we just need to make the best of things and be prepared and above all take advantage of opportunities around us.
As with all things in life, we just need to make the best of things and be prepared and above all take advantage of opportunities around us.
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
BillE.Dee
- BillE.Dee
-
Weldmonger
-
Posts:
-
Joined:Mon Nov 27, 2017 8:53 pm
-
Location:Pennsylvania (Northeast corner)
Not sure if this is the right part of the forum, BUT, where the heck is everyone? I'm basically retired and have plenty of time to get in here and read about operations and problems with those ops. Also looking for some assistance in fixing problems, helping newbies and picking brains for help. We have tweake as a new admin, Jonathan and others are still admin as far as I know. I know people are working harder and longer to make life better. Let's get this forum going again.
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
Unfortunately, years ago, most of the familiar faces (regulars) moved on. A few have passed away and who knows about the rest. I was unactive for quote a while. I've tried to reach out to Otto but have not been successful. Mick is still kicking but hasn't been on in a while. Taked to him a week or two ago.
I do miss the old times though.
I do miss the old times though.
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
sign of the times a bit. social media has taken a big chunk out of forums. most forums are quite these days. bit of a shame as forums are still much better for asking, trouble shooting, and disusing things.BillE.Dee wrote: ↑Fri Jul 07, 2023 9:01 am Not sure if this is the right part of the forum, BUT, where the heck is everyone? I'm basically retired and have plenty of time to get in here and read about operations and problems with those ops. Also looking for some assistance in fixing problems, helping newbies and picking brains for help. We have tweake as a new admin, Jonathan and others are still admin as far as I know. I know people are working harder and longer to make life better. Let's get this forum going again.
a few that i was on have gone due to covid, the business that hosted it is gone. another one had a big change due to the main person doing the IT behind it passing away.
some that had a lot of "alterative" people on have moved on, most likely all gone to social media where they can vent without anyone questioning them.
otherwise lives change and not every one is a forum geek.
on the welding side i see quite a few online welding training setups now, which is all good.
what can help is simply you guys chatting. looking like its busy helps attract other people.
tweak it until it breaks
let me know if you catch up with those guys and they still want to be mods.Superiorwelding wrote: ↑Fri Jul 07, 2023 11:38 pm Unfortunately, years ago, most of the familiar faces (regulars) moved on. A few have passed away and who knows about the rest. I was unactive for quote a while. I've tried to reach out to Otto but have not been successful. Mick is still kicking but hasn't been on in a while. Taked to him a week or two ago.
I do miss the old times though.
i'll have to check if i have permission to clean up some of the mods.
tweak it until it breaks
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
I would guess that all the others are not interested for sure. Some haven't been on in years. I'll see if I can reach out to them here soon.tweake wrote: ↑Sat Jul 08, 2023 12:05 amlet me know if you catch up with those guys and they still want to be mods.Superiorwelding wrote: ↑Fri Jul 07, 2023 11:38 pm Unfortunately, years ago, most of the familiar faces (regulars) moved on. A few have passed away and who knows about the rest. I was unactive for quote a while. I've tried to reach out to Otto but have not been successful. Mick is still kicking but hasn't been on in a while. Taked to him a week or two ago.
I do miss the old times though.
i'll have to check if i have permission to clean up some of the mods.
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
BillE.Dee
- BillE.Dee
-
Weldmonger
-
Posts:
-
Joined:Mon Nov 27, 2017 8:53 pm
-
Location:Pennsylvania (Northeast corner)
I will try to reach out to some of the old timers. I'll also try to get some new folks to sign up. I feel it is important to stay in touch with the world in a manner that gets folks talking.
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities