This is setting the 400-ton anchors for the Hood Canal Bridge.
![Image](http://imagizer.imageshack.us/v2/xq90/836/xrlb.jpg)
Here is the Tacoma Narrows Bridge.
![Image](http://imagizer.imageshack.us/v2/xq90/837/y6y9.jpg)
John was just being sarcastic.steeldr. wrote:my experience using 3/32 6013 is for thin metal, not for 1/2 in. steel. I would recommend 6010 1/8 inch for the root pass and finish using 7018 1/8. or, use 6010 for the complete job.(METAL MUST BE CLEAN AND DRY IF YOU USE 7018 WIRE.)
Looks like it's coming along pretty goodAKweldshop wrote:Let the bashing begin.
More pics tomorrow....
~John
Excellent!! For starters....MinnesotaDave wrote:Looks like it's coming along pretty goodAKweldshop wrote:Let the bashing begin.
More pics tomorrow....
~John![]()
Oh, almost forgot to follow instructions..."wrong rods", "wrong amps", "that'll never work".....
How's that?
Return to “Stick Welding/Arc Welding - Shielded Metal Arc Welding”