Stick Welding Tips, Certification tests, machines, projects
Need some 3/32 6013 on 1/2 in plate.
Post Reply
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

AKweldshop wrote:
MinnesotaDave wrote:
AKweldshop wrote:Let the bashing begin.

More pics tomorrow....

~John :?
Looks like it's coming along pretty good :)

Oh, almost forgot to follow instructions..."wrong rods", "wrong amps", "that'll never work".....

How's that?
Excellent!! For starters....

I probabbly will grind the corners down.
Neat idea on the circle burner. I have one somewhere.
I apologize for showing pictures of the slag.
I ran three passes on each of the sides, I'll get pics of those.
Should be interesting.

Don't think I'm fishing for compliments when I post pics of my work.
It's humble work. No need for bragging.

I'll have it done today, I'll make a video of it functioning.
Maybe I ought to grind the welds out. I just got a 5lb box of 3/32 6013.
What do you think?? :D

~John
3/32" 6013 is way too big for that job - probably overheat and burn a hole right through it :D :lol:
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

MinnesotaDave wrote:




3/32" 6013 is way too big for that job - probably overheat and burn a hole right through it :D :lol:
No problem.

http://forum.weldingtipsandtricks.com/d ... hp?id=2874
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

LOL, yeah that is much better - everyone knows 1/16" 6013 is the go-to rod for heavy equip :D
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Really now, lets let this 6013 go.... Put it behind us.

I've used 7018 for years, proven itself many times over.

Been using 6013 for a few minutes, and decided I can do better.

7018 out...

I prolly could of used 3/16 8018 for this, but, she'l hold with 1/8 7018.

BTW,
I used my Invertec 200.
Very nice machine!!

More pics this afternoon.

~John
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
kermdawg
  • Posts:
  • Joined:
    Tue May 25, 2010 8:16 pm
  • Location:
    All over, mostly southwest USA

Why waste time? 5/16 8018 at 300 amps single pass boom done. Kinda milking that job with 3 passes of 6013 aren't you???
Signature? Who needs a F***ing signature?
Top
wheresmejumper
  • Posts:
  • Joined:
    Mon Jan 14, 2013 6:14 pm
  • Location:
    Ireland

AKweldshop wrote:Really now, lets let this 6013 go.... Put it behind us.

I've used 7018 for years, proven itself many times over.

Been using 6013 for a few minutes, and decided I can do better.

7018 out...

I prolly could of used 3/16 8018 for this, but, she'l hold with 1/8 7018.

BTW,
I used my Invertec 200.
Very nice machine!!

More pics this afternoon.

~John
theres a few 275's on ebay, one bin for $685
Dancing with the blue lady
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

kermdawg wrote:Why waste time? 5/16 8018 at 300 amps single pass boom done. Kinda milking that job with 3 passes of 6013 aren't you???

I think I'll grind them out and use 5/32 7024, 2 passes at 200amps.

She's complete.

More pics tonight.

with video....
~John
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
kermdawg
  • Posts:
  • Joined:
    Tue May 25, 2010 8:16 pm
  • Location:
    All over, mostly southwest USA

I know a bad ass welder than can run 7024 forewards AND backwards!

Seriously though, if you want something done right, you gotta forge weld it....
Signature? Who needs a F***ing signature?
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

I cut the rod in half to make two pieces.
IMG_2230.JPG
IMG_2230.JPG (69.66 KiB) Viewed 1205 times
IMG_2231.JPG
IMG_2231.JPG (126.77 KiB) Viewed 1205 times
IMG_2235.JPG
IMG_2235.JPG (57.64 KiB) Viewed 1205 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Drilling a hole in the ends.
7/16...
IMG_2252.JPG
IMG_2252.JPG (131.87 KiB) Viewed 1205 times
IMG_2253.JPG
IMG_2253.JPG (94.01 KiB) Viewed 1205 times
IMG_2256.JPG
IMG_2256.JPG (70.21 KiB) Viewed 1205 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Well,
She's done.
They are 26inches apart closed, and slide out to 75inches.
They past the first test.
2,000lbs.
IMG_2257.JPG
IMG_2257.JPG (57.8 KiB) Viewed 1204 times
IMG_2259.JPG
IMG_2259.JPG (51.3 KiB) Viewed 1204 times
IMG_2261.JPG
IMG_2261.JPG (86.67 KiB) Viewed 1204 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

IMG_2262.JPG
IMG_2262.JPG (108.7 KiB) Viewed 1199 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

The customer is very satisfied...
Me too. 8-)

Here's a quick video...

https://www.youtube.com/watch?v=LUxoQzSDkvw
IMG_2322.JPG
IMG_2322.JPG (135.19 KiB) Viewed 1186 times
IMG_2323.JPG
IMG_2323.JPG (84.43 KiB) Viewed 1186 times
IMG_2324.JPG
IMG_2324.JPG (84.25 KiB) Viewed 1186 times
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

John,
I think you did a great job! Keep up the great work.
-Jonathan
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Superiorwelding wrote:John,
I think you did a great job! Keep up the great work.
-Jonathan

Thanks Jonathan.
I think I will grind those welds out, and use a bigger rod...

But it passes the 2,000lb test great!!

Thanks for putting up with this long project, I'm sure I'm not the only one glad to see it finished...

~John
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

Don't grind them out, just add to them and make a bigger fillet. Unless they were not good welds which I am sure they are. Grinding them out will be for nothing in my opinion.
-Jonathan
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Superiorwelding wrote:Don't grind them out, just add to them and make a bigger fillet. Unless they were not good welds which I am sure they are. Grinding them out will be for nothing in my opinion.
-Jonathan

Good thinking...
I'll do a "cap" pass....

Gotta have at least 3/4 filet......

~John
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

wheresmejumper wrote:
AKweldshop wrote:Really now, lets let this 6013 go.... Put it behind us.

I've used 7018 for years, proven itself many times over.

Been using 6013 for a few minutes, and decided I can do better.

7018 out...

I prolly could of used 3/16 8018 for this, but, she'l hold with 1/8 7018.

BTW,
I used my Invertec 200.
Very nice machine!!

More pics this afternoon.

~John
theres a few 275's on ebay, one bin for $685
Hey Man,

Thanks for the tip!!
I emailed the guy, and he didn't want to ship to AK.
So I scored this one.... 8-) 8-)
http://www.ebay.com/itm/231229692791?ss ... 1497.l2649

~John
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
Post Reply

Return to “Stick Welding/Arc Welding - Shielded Metal Arc Welding”