[dmcnally]

This is my hybrid welding cart.

pic-00.jpg (203.78 KiB) Viewed 1797 times

I call it a hybrid because I started with an AV (audio visual) cart and added some features.

pic-02.jpg (30.83 KiB) Viewed 1797 times

Initial placement of welder and water cooler.

pic-03.jpg (169.7 KiB) Viewed 1797 times

This is how I used the cart while I was deciding what to build. The argon bottle is chained to the shelf unit.

pic-04.jpg (52.58 KiB) Viewed 1797 times

I added a bottle support to the cart. I used velcro luggage straps (from Home Depot) to secure the argon tank and water pipe insulators to pad the frame.

pic-13.jpg (184.51 KiB) Viewed 1797 times

I added a removable shelf to the cart.

pic-14.jpg (203.78 KiB) Viewed 1797 times

Cart with shelf removed.

pic-15.jpg (216.84 KiB) Viewed 1797 times

This is the hanger for the shelf.

pic-16.jpg (25.81 KiB) Viewed 1797 times

And here are the clips on the shelf.

pic-17.jpg (34.44 KiB) Viewed 1797 times

A close up of the frame and shelf.

pic-18.jpg (137.92 KiB) Viewed 1797 times

A close up of the shelf.

pic-19.jpg (32.55 KiB) Viewed 1797 times

[AndersK]

Like it, good job

[homeboy]

Nice-compact and neat. What I really like are the 4 caster wheels for easy maneuvering. If your shop is limited for space at times like mine it sure is nice to be able to grab it anywhere and it will follow.

[dmcnally]

Thanks. My shop (or garage) is pretty cramped and the cart only needs to move 2-3 feet.

[5th Street Fab]

I like it. Where'd you get the water cooler

Sent from my SM-G920V using Tapatalk

[dmcnally]

Thanks. I bought the water cooler through a surplus auction on http://www.govliquidation.com. I'm almost embarrassed to say that my winning bid was $35 ($45 with buyers premium and CA sales tax). It did cost me a days time to drive 4 hours each way to pick it up.

75429805.jpg (50.47 KiB) Viewed 1726 times

Dave