[LtBadd]

Has anyone used this Heat Paste?

p_083012100_1.jpg (30.39 KiB) Viewed 1772 times

[Poland308]

I haven't used that but I was recently shown this.
I plan on getting a can soon. It was priced at about 25$

IMG_0307.JPG (34.16 KiB) Viewed 1763 times

[Poland308]

I have to drive by the Brownells new headquarters on my way home tomorrow.

[LtBadd]

Reusable, that sounds good, I'll have to look into that. Thanks for posting that Josh

[Otto Nobedder]

I've used an aerosol gel heat-block spray, but I haven't done a real comparison to tell you if it had any effect short of costing money.

Steve

[electrode]

Has anyone used this Heat Paste?

p_083012100_1.jpg

I used to use that stuff on my wiener but it itches too much to tolerate.

[LtBadd]

Has anyone used this Heat Paste?

p_083012100_1.jpg

I used to use that stuff on my wiener but it itches too much to tolerate.

Well you just have to learn to read the label first.

[electrode]

Has anyone used this Heat Paste?

p_083012100_1.jpg

I used to use that stuff on my wiener but it itches too much to tolerate.

Well you just have to learn to read the label first.

[exnailpounder]

Has anyone used this Heat Paste?

p_083012100_1.jpg

I used to use that stuff on my wiener but it itches too much to tolerate.

Well you just have to learn to read the label first.

See....and you guys think I'm bad It must be breeding season...every thread turns into a soft porn article. Hope farm kid doesn't see this He might get corrupted

[Farmwelding]

Wow...I guess it is too late. Must be spring fever

Here's my question-what is this heat paste? Does it reduce heat input or what?

[exnailpounder]

Wow...I guess it is too late. Must be spring fever

Here's my question-what is this heat paste? Does it reduce heat input or what?

It absorbs heat...kinda like a chunk of AL or copper. Nice to have if your welding near something that can be ruined by heat like a grommet or packing gland etc.... That's the abbreviated version.

[Poland308]

Lol you said Packing Gland!

[exnailpounder]

Lol you said Packing Gland!

I want him to work on his GoogleFu.

[LtBadd]

Lol you said Packing Gland!

I want him to work on his GoogleFu.

Well, if he's using Microsoft IE I suggest that you first go into InPrivate Browsing mode so there won't be a history of visited websites...er um at least I think I read that somewhere, on the internet, maybe.

[Poland308]

Google sees all

[Otto Nobedder]

"Packing Gland" is redundant.

Packing and gland are synonyms.

Steve

[Poland308]

Unless Packing is an action and not a thing.

[exnailpounder]

https://www.youtube.com/watch?v=xrB1IpCXNQ0

PACKING GLAND is how I learned it.

[electrode]

Just catching up here on some thread diversions...

[exnailpounder]

These guys are amateur jackers....you gotta go waaaaayyyyy left of center to de-rail ....but you already knew that didn't you electrode?

[electrode]

These guys are amateur jackers....you gotta go waaaaayyyyy left of center to de-rail ....but you already knew that didn't you electrode?

I learned everything about thread jacking from you. You are the master. And your apprentice Farm Boy is learning fast!

[exnailpounder]

These guys are amateur jackers....you gotta go waaaaayyyyy left of center to de-rail ....but you already knew that didn't you electrode?

I learned everything about thread jacking from you. You are the master. And your apprentice Farm Boy is learning fast!

You're so full of shit

[electrode]

These guys are amateur jackers....you gotta go waaaaayyyyy left of center to de-rail ....but you already knew that didn't you electrode?

I learned everything about thread jacking from you. You are the master. And your apprentice Farm Boy is learning fast!

You're so full of shit

I was...until a few minutes ago.

[exnailpounder]

Thanks for the 411 there buddy Here goes a thread in an entirely new territory

[LtBadd]

Thanks for the 411 there buddy Here goes a thread in an entirely new territory

it's like it's come full circle, from heat paste to s--t waste, is there an application here?