General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
Post Reply
Wobulate
  • Posts:
  • Joined:
    Fri Oct 15, 2010 1:30 am
  • Location:
    USA

To All,

I noticed there is alot of interest these days in Fume Extractors. I would like to recommend Pace Fume Extractors from www.pacedirect.com. Where most extractors cost thousands, they have a model (ARM-EVAC 50) that starts at $797, not cheap but definitly more afordable. A cheaper method would be to use an extracting fan and rout the exhaust hose outside.

I use a Pace at home, the filter is made of layers of fiber material and carbon, it also has a HEPA filter element. I bought mine used from a company that was moving and had to much equipment to fit in their new location.

Wob
WOB
Lincoln,Precision TIG225
Miller,Millermatic 251
Miller,Spoolmatic 30A
Miller,Millermatic 130XP
Miller,Spectrum 625
Miller,Thunderbolt 225AC
KMG,Belt Grinder/2x72
Ingersoll Rand,Compressor/5HP
MSC/Vectrax,Band Saw Horizontal-Vertical/7x12
Post Reply