General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
Copper work today
Post Reply
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

Did a chilled water pump upgrade today. Increased discharge check valve from 4” to 5” for increased flow.
IMG_4842.JPG
IMG_4842.JPG (91.23 KiB) Viewed 521 times
Halfway through my oxy regulator failed causing my oxy hose to whip off and strike me.
IMG_4848.JPG
IMG_4848.JPG (53.29 KiB) Viewed 521 times
Oh well, some would say I needed a good whipping. :)



Sent using Tapatalk
Flat out like a lizard drinkin'
Top
cj737
  • Posts:
  • Joined:
    Thu Sep 29, 2016 8:59 am

Who says welding isn’t a contact sport?
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

looks like it got pretty close to your head, ouch..
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

My lips were a little swollen so they may have taken a swipe or near miss. It happened too fast to see what was going on. Had to work out what happened. Initially I thought the hose failed and took out the reg but after close inspection I realised it was the other way round.


Sent using Tapatalk
Flat out like a lizard drinkin'
Top
User avatar
  • Posts:
  • Joined:
    Sun Nov 19, 2017 10:09 am

Are you sure your wife didn't do that? :P
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter

" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
Top
Post Reply

Return to “Welding Forum General Shop Talk”