I recently purchased a used Miller PAPR. I really like it overall but there have been a few things that really could help bring down the cost and some flexibility that I hope will be of use to others.
First the ridiculously priced battery packs. PLEASE NOTE THAT THE PACK CASING WAS NOT MADE TO BE OPENED AND REASSEMBLED. The case is a pain to split apart however the casing will be fine you just can’t snap it back together. If you are patient it is straightforward, a screwdriver and plastic scraper were what I had used. I am fine with that and will reglue it or use an RTV silicone or gasket material. The pack consists of 4 18650 batteries that are very inexpensive and look to use a standard RC car battery pack connector. I do not have any to verify that information though.
Second I prefer the Lincoln Viking 3350 Auto Darkening Filter over the Miller ADF and was pleasantly surprised to find out that the Viking fits easily into the Miller’s retaining rubber holder. The opposite is almost true if you grind down the 4 clips since the Miller is thicker than the Lincoln ADF.
Third is just a tip - mine had a slight odor to it that I am uncertain of its nature but it was used so who knows. Washing the hose wasn’t quite enough to clear it so I found you can fit a dryer sheet on the OUTSIDE of the HEPA filter and get a very cheap air freshener.
General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities