Otherwise known as a cherry picker. Every now and then, we, as welders and fabricators need to move something really, really heavy and we've already gone through our lists of friends whose backs we have ruined by having them help us move really heavy things. This is where a cherry picker comes in handy. The 2 ton model sold at Harbor Freight is actually a pretty good unit for the money. It's normally about $200, I got mine on sale for $189. It goes together pretty easily and it picks up what it says it will.
That being said, for $200, it can't be perfect and it's not. The steel casters that come with it are complete P's.O.S. The crane will pick up 2 tons, but you won't be able to roll it anywhere. If you buy one, the first thing you should do is unbolt the casters that come with it and toss them in the scrap pile. Replace them with a nice $30+/ea steel wheel caster, and you'll have a fairly nice shop crane.
delraydella
- delraydella
-
Weldmonger
-
Posts:
-
Joined:Mon Apr 25, 2011 7:35 pm
-
Location:Detroit, MI
Welding☞Syncrowave 250,Millermatic 252,30a Spoolgun Cutting☞12" Hi-speed Cutoff Saw, 9x 12 Horizontal Bandsaw Milling☞Gorton 8d Vertical Mill Turning☞Monarch EE Precision Lathe Grinding ☞Brown & Sharpe #5 Surface Grinder
TheExpert
- TheExpert
-
Workhorse
-
Posts:
-
Joined:Thu Sep 08, 2011 7:48 am
-
Contact:
I have search for it on Google. You may get nice solution at there.
I bought one of these about 6 tears ago to pull the (6.2l diesel, the heaviest one) motor from my Blazer, and it worked just fine. They must have gone and cheapened them since, mine has all four cast iron wheels and SOLID casters. I dont use it much, it just sits there most of the time. As I recall, the cost was about the same as now. anyway, , , -corn-
Look! a hole in the space-time continuum!