mig and flux core tips and techniques, equipment, filler metal
pulsed mig
Post Reply
masawemps
  • Posts:
  • Joined:
    Wed Mar 02, 2011 10:51 am

my only question is I have been running a mm 350p and was wondering is it ok to pull or do you have to always use a push travel angle as you would with regular spray transfer?
Top
User avatar
  • Posts:
  • Joined:
    Fri Feb 12, 2010 10:48 am
  • Location:
    YOUNGSTOWN, OHIO

If it's aluminum, you have to push. If it's steel, you can push or pull. Which ever works for you.
Jim
Pipefitter/Weldor out of Local 396
Millermatic 252
Dynasty 200DX
Maxstar 150 STL
Spoolmate 100
Hypertherm Powermax 85
Miller Digital Elite
JD2 Model 32 Bender
Emerson 7120 Horizontal/Vertical Bandsaw
Oxy-Gas Torch outfit
Generac XP8000E Generator
Top
Post Reply

Return to “Mig and Flux Core - gas metal arc welding & flux cored arc welding”