Welding Helmet suggestions

Josh MacD · Tue Apr 28, 2020 4:42 pm

I've done a thorough search of the backlog and found that the Lincoln 3350 is a pretty solid helmet and not a bad price point. I do see some members talking about some comparable 'knock-offs" but I don't see any specific names.

Also, facebook Big Brother saw my searching and sent me an add for an eastwood helmet for $120. Any thoughts?

Any other great helmets that won't break the bank or my marriage?

cwby · Tue Apr 28, 2020 4:46 pm

I bought an ESAB Savage A40 from cyberweld @ $89.00. I like it & the view is pretty good for the price. I also have a miller digital elite, the ESAb gets used more.

https://store.cyberweld.com/esab-savage ... gJnO_D_BwE

Spartan · Tue Apr 28, 2020 4:54 pm

I love my viking 3350. Definitely the most reliable I've used and provides the clearest picture of the puddle out of the 5 or so helmets I've owned over the years. Also can see a lot of colors with it that you just can't see with other helmets, and that really helps with anticipating what the arc is doing and to get an early warning if things might be about to go south. Only complaint is that it is a tiny but heavy for my liking, but I've gotten used to that.

Got mine maybe a year or so ago, and only paid $190 for it I think which is super reasonable, IMO. Baker's gas had them on sale, and Lincoln was offering a $50 rebate which got it down to the $190.

LtBadd · Tue Apr 28, 2020 6:00 pm

The 3350 is a good hood and I doubt you'll regret it. There are others of course but without being able to try them the Lincoln is a safe bet. I like the Miller's X mode for TIG welding which is what I do most of the time.

BillE.Dee · Wed Apr 29, 2020 7:11 am

I have a 3350 and find that a just right angle towards a light will trigger the auto darkening and have to look away for a second to get back to where I can see ... old eyes cause this. I haven't tried auto dark with X mode like Richards, but sure would like to.

Spartan · Wed Apr 29, 2020 5:47 pm

BillE.Dee wrote:I have a 3350 and find that a just right angle towards a light will trigger the auto darkening and have to look away for a second to get back to where I can see ... old eyes cause this. I haven't tried auto dark with X mode like Richards, but sure would like to.

I don't think I've ever had that happen with my 3350, and I always keep the sensitivity on the highest setting. I only have fluorescent and LED lights in my shop, though. Are you using any incandescent lights, or other lights that may be putting out a lot of either UV or IR light?

Edit: Come to think of it, I believe it is only IR light that triggers the helmets, and UV surprisingly has nothing to do with it. I had tested that awhile back with both UV and IR flashlights (I use them for hunting), and it was only the IR which triggered the auto-darkening.

BillE.Dee · Wed Apr 29, 2020 6:42 pm

sometimes I have an incandescent light on to brighten up the shop. Also, when I'm working with a door open and working towards the open door ... zip ... the helmet will darken until I turn away. Just some things I have to get used to. Otherwise a good helmet.

Spartan · Wed Apr 29, 2020 6:57 pm

BillE.Dee wrote:sometimes I have an incandescent light on to brighten up the shop. Also, when I'm working with a door open and working towards the open door ... zip ... the helmet will darken until I turn away. Just some things I have to get used to. Otherwise a good helmet.

Just asking in case you hadn't already done it: Have you tried adjusting the sensitivity knob on the inside of the helmet?

VA-Sawyer · Wed Apr 29, 2020 8:54 pm

I'm surprised that Miller doesn't offer a wireless helmet, to go with the wireless foot pedal. They could even make it auto adjusting to the current flow.

Spartan · Wed Apr 29, 2020 9:11 pm

VA-Sawyer wrote:I'm surprised that Miller doesn't offer a wireless helmet, to go with the wireless foot pedal. They could even make it auto adjusting to the current flow.

Optrel has some hoods that have an "auto-pilot" mode to automatically adjust shades based on current. Of course, it is in no way connected to the machine, and presumably just changes shade based on observed "brightness" thresholds. I would probably disable it pretty quickly and just set the shades myself, but who knows...it may be great.

Also recently saw that Lincoln is now offering wireless foot pedals.

Oscar · Wed Apr 29, 2020 9:39 pm

Auto-Pilot is great for TIG w/foot pedal, where it is typical to ramp-up and ramp-down manually. It keeps the arc brightness constant, as your eyes see it. For MIG/Stick welding, it's not too useful, unless you are using a hand amptrol where you are actually changing the welding current on-the-fly.

VA-Sawyer · Wed Apr 29, 2020 10:45 pm

All of the AutoDark helmets expose your eyes to a very short time of arc flash. They react to the bright light, and then dim. A thousand brief arc flashes during a day of welding, has to have some adverse effect on your eyes.
A wireless connected helmet could do the opposite. It could actually darken a very short time BEFORE the arc is started. No false triggers, no short flashes, add in the auto adjust, it has to lead to a more comfortable work session.

BillE.Dee · Thu Apr 30, 2020 7:25 am

Just asking in case you hadn't already done it: Have you tried adjusting the sensitivity knob on the inside of the helmet?[/quote]

I've tried moving sensitivity .. I am learning .. just "sometimes" my mind gets focused on the project instead of the surroundings. Also, changing some light fixtures.
Don't get old and take care of what ya got... says the old fart who got lax.
gramps.