[MikeTheExpat]

Hi,
please let me know how to improve: the goal is fully weld all the way to the center with minimum cross-over
test one:

IMG_20200420_085824 - Copy.jpg (24.6 KiB) Viewed 485 times

parameters: 130kV, 70mA, 5mm/s, under-focus 5mA - diameter 96mm

test two:

mmexport1593791600305 - Copy.jpg (41.18 KiB) Viewed 485 times

parameters: 130kV, 75mA, 5mm/s, under-focus 20mA- diameter 96mm
notice the porosity near the center due to cross over

what to change?

[Oscar]

Welcome Miketheexpat. You took a wrong turn somewhere and landed in the Welding tips & tricks forum. Here we do down & DIRTY welding. We dont do no stinkin ebw! Good luck with your endeavor. You might need to pay for professional engineering consultation for something like this..

[Spartan]

Looks like your flux capacitor may be on the fritz.

[BillE.Dee]

HUH ??